Assoc. Prof. Dr.
Emel KURAM
Mechanical Engineering
- Phone
- +90 (262) 605 27 77
- kuram@gtu.edu.tr
- Office
- Block H2, Z19
- Areas of interest
Dersler
Lisans
1. ME412 - Machining
Lecture 3-1, Lecture 3-2, Lecture 3-3
Lecture 4-1, Lecture 4-2, Lecture 4-3
Lecture 5
Lecture 6
Lecture 7
Lecture 8-1, Lecture 8-2
Lecture 9
Lecture 10
Lecture 11-1, Lecture 11-2
Lecture 12-1, Lecture 12-2
Homework 1 - DUE TIME: 14PM ON MONDAY 27 MARCH, 2023 (Late homework is not evaluated.)
Homework 2 - DUE TIME: 14PM ON MONDAY 24 APRIL, 2023 (Late homework is not evaluated.)
Homework 3 - DUE TIME: 14PM ON MONDAY 22 MAY, 2023 (Late homework is not evaluated.)
Homework 4 - DUE TIME: 14PM ON MONDAY 5 JUNE, 2023 (Late homework is not evaluated.)
*** Announcement: Midterm exam will be held on 8 May, 2023 at 10 am.
*** Announcement: Midterm exam grades (8 May, 2023)
*** Announcement: Total grades (, 2023)
Examination Rules for Students
2. ME414 - Polymer Materials and Polymer Processing Techniques
Lecture 2
Lecture 4
Lecture 5-1, Lecture 5-2, Lecture 5-3, Lecture 5-4
Lecture 6-1, Lecture 6-2
Lecture 7
Lecture 8-1, Lecture 8-2, Lecture 8-3, Lecture 8-4, Lecture 8-5, Lecture 8-6
Lecture 9-1, Lecture 9-2
Lecture 10-1, Lecture 10-2, Lecture 10-3
Lecture 11-1, Lecture 11-2, Lecture 11-3
Lecture 12
Homework 1 - DUE TIME: 17PM ON MONDAY 3 APRIL, 2023 (Late homework is not evaluated.)
Homework 2 - DUE TIME: 17PM ON MONDAY 10 APRIL, 2023 (Late homework is not evaluated.)
Homework 3 - DUE TIME: 17PM ON MONDAY 15 MAY, 2023 (Late homework is not evaluated.)
Homework 4 - DUE TIME: 17PM ON MONDAY 5 JUNE, 2023 (Late homework is not evaluated.)
*** Announcement: Midterm exam will be held on 15 May, 2023 at 13 pm.
*** Announcement: Midterm exam grades (15 May, 2023)
*** Announcement: Total grades (, 2023)
Examination Rules for Students
Lisansüstü
1. ME633 - Mechanical Properties of Polymers and Polymer Processing Techniques
*** Announcement: Midterm exam grade (, 2023)
2. ME636 - Sustainable Machining
*** Announcement: Midterm exam grade (, 2023)
3. ME637 - Micro Machining
*** Announcement: Midterm exam grade (, 2023)
A. Uluslararası Makaleler
1. Babur OZCELIK, Emel KURAM, Erhan DEMIRBAS, Emrah ŞIK, “Optimization of Surface Roughness in Drilling Using Vegetable Based Cutting Oils Developed from Sunflower Oil”, 2009, Accepted.
2. Babur OZCELIK, Emel KURAM, Bilgin Tolga SIMSEK, "Comparison of Dry and Wet End Milling of AISI 316 Stainless Steel", 2010, Accepted.
3. Emel KURAM, Babur OZCELIK, Erhan DEMIRBAS, Emrah ŞIK, Ibrahim N. TANSEL, "Evaluation of New Vegetable Based Cutting Fluids on Thrust Force and Surface Roughness in Drilling of AISI 304 Using Taguchi Method", 2010, Accepted.
4. Emel KURAM, Babur OZCELIK, Bilgin Tolga SIMSEK, Erhan DEMIRBAS, "The Effect of Extreme Pressure Added Vegetable Based Cutting Fluids on Cutting Performance in Milling", 2011, Accepted.
5. Bilgin Tolga SIMSEK, Emel KURAM, Babur OZCELIK, "The Performance of Different Tool Holders in Dry Milling", 2011, Accepted.
6. M. Huseyin CETIN, Babur OZCELIK, Emel KURAM, Erhan DEMIRBAS, "Evaluation of Vegetable Based Cutting Fluids with Extreme Pressure and Cutting Parameters in Turning of AISI 304L by Taguchi Method", 2011, Accepted.
7. Babur OZCELIK, Emel KURAM, M. Huseyin CETIN, Erhan DEMIRBAS, "Experimental Investigations of Vegetable Based Cutting Fluids with Extreme Pressure during Turning of AISI 304L", 2011, Accepted.
8. Babur OZCELIK, Emel KURAM, M. Mustafa TOPAL, "Investigation the Effects of Obstacle Geometries and Injection Molding Parameters on Weld Line Strength Using Experimental and Finite Element Methods in Plastic Injection Molding", 2011, Accepted.
9. Emel KURAM, M. Huseyin CETIN, Babur OZCELIK, Erhan DEMIRBAS, "Performance Analysis of Developed Vegetable Based Cutting Fluids by D-Optimal Experimental Design in Turning Process", 2012, Accepted.
10. Emel KURAM, Babur OZCELIK, M. Huseyin CETIN, Erhan DEMIRBAS, Sule ASKIN, "Effects of Blended Vegetable Based Cutting Fluids with Extreme Pressure on Tool Wear and Force Components in Turning of Al 7075-T6", 2012, Accepted.
11. Emel KURAM, Babur OZCELIK, Mahmut BAYRAMOGLU, Erhan DEMIRBAS, Bilgin Tolga SIMSEK, "Optimization of Cutting Fluids and Cutting Parameters during End Milling by Using D-Optimal Design of Experiments", 2012, Accepted.
12. Emel KURAM, Babur OZCELIK, "Fuzzy Logic and Regression Modelling of Cutting Parameters in Drilling Using Vegetable Based Cutting Fluids", 2012, Accepted.
13. Emel KURAM, Enis TASCI, Ali Ihsan ALTAN, Mehmet Metin MEDAR, Faruk YILMAZ, Babur OZCELIK, "Investigating the Effects of Recycling Number and Injection Parameters on the Mechanical Properties of Glass-Fibre Reinforced Nylon 6 Using Taguchi Method", 2013, Accepted.
14. Emel KURAM, Babur OZCELIK, "Multi-Objective Optimization Using Taguchi Based Grey Relational Analysis for Micro Milling of Al 7075 Material with Ball Nose End Mill", 2013, Accepted.
15. Babur OZCELIK, Emel KURAM, Erhan DEMIRBAS, Emrah ŞIK, "Effects of Vegetable Based Cutting Fluids on the Wear in Drilling", 2013, Accepted.
16. Emel KURAM, Babur OZCELIK, Faruk YILMAZ, Gokhan TIMUR, Zeynep Munteha SAHIN, "The Effect of Recycling Number on the Mechanical, Chemical, Thermal, and Rheological Properties of PBT/PC/ABS Ternary Blends : with and without Glass-Fiber", 2013, Accepted.
17. Emel KURAM, Zeynep Munteha SAHIN, Babur OZCELIK, Faruk YILMAZ, Mehmet Metin MEDAR, "Recyclability of Polyethylene/Polypropylene Binary Blends and Enhancement of their Mechanical Properties by Reinforcement with Glass-Fiber", 2014, Accepted.
18. Emel KURAM, Levent SARAC, Babur OZCELIK, Faruk YILMAZ, "Mechanical, Chemical, Thermal, and Rheological Properties of Recycled PA6/ABS Binary and PA6/PA66/ABS Ternary Blends", 2014, Accepted.
19. Emel KURAM, Babur OZCELIK, "Micro-Milling Performance of AISI 304 Stainless Steel Using Taguchi Method and Fuzzy Logic Modelling", 2014, Accepted.
20. Emel KURAM, Gokhan TIMUR, Babur OZCELIK, Faruk YILMAZ, "Influences of Injection Conditions on Strength Properties of Recycled and Virgin PBT/PC/ABS", 2014, Accepted.
21. Emel KURAM, Babur OZCELIK, Faruk YILMAZ, "The Influence of Recycling Number on the Mechanical, Chemical, Thermal and Rheological Properties of Poly(butylene terephthalate)/Polycarbonate Binary Blend and Glass-Fibre-Reinforced Composite", 2014, Accepted.
22. Emel KURAM, Babur OZCELIK, "Optimization of Machining Parameters during Micro-Milling of Ti6Al4V Titanium Alloy and Inconel 718 Materials Using Taguchi Method", 2015, Accepted.
23. Emel KURAM, Babur OZCELIK, Faruk YILMAZ, "The Effects of Recycling Process on Thermal, Chemical, Rheological, and Mechanical Properties of PC/ABS Binary and PA6/PC/ABS Ternary Blends", 2015, Accepted.
24. Emel KURAM, Babur OZCELIK, "Effects of Tool Paths and Machining Parameters on the Performance in Micro-Milling of Ti6Al4V Titanium with High-Speed Spindle Attachment", 2015, Accepted.
25. Ibrahim HAMARAT, Emel KURAM, Babur OZCELIK, "Investigation the Mechanical, Rheological, and Morphological Properties of Acrylonitrile Butadiene Styrene Blends with Different Recycling Number Content", 2017, Accepted.
******************************************************************************************************************************************************************************************************************************************
26. Emel KURAM, "Micro-Machinability of Injection Molded Polyamide 6 Polymer and Glass-Fiber Reinforced Polyamide 6 Composite", Composites Part B: Engineering, 88 (2016) 85-100.
27. Emel KURAM, "Nose Radius and Cutting Speed Effects during Milling of AISI 304 Material", Materials and Manufacturing Processes", 32 (2) (2017) 185-192.
28. Emel KURAM, "The Effect of Monolayer TiCN-, AlTiN-, TiAlN- and Two Layers TiCN + TiN- and AlTiN + TiN-Coated Cutting Tools on Tool Wear, Cutting Force, Surface Roughness and Chip Morphology during High-Speed Milling of Ti6Al4V Titanium Alloy", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232 (7) (2018) 1273-1286.
29. Emel KURAM, "Micro-Milling of Unreinforced and Reinforced Polypropylene", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233 (1) (2019) 87-98.
30. Emel KURAM, "Thermal and Water Ageing Effect on Mechanical, Rheological and Morphological Properties of Glass-Fibre-Reinforced Poly(oxymethylene) Composite", Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 233 (2) (2019) 211-224.
31. Emel KURAM, "Overhang Length Effect during Micro-Milling of Inconel 718 Superalloy", Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41 (2019) 166.
32. Emel KURAM, "Hybridization Effect of Talc/Glass Fiber as a Filler in Polycarbonate/Acrylonitril-Butadiene-Styrene Composites", Composites Part B: Engineering, 173 (2019) 106954.
33. Emel KURAM, "Rheological, Mechanical and Morphological Properties of Acrylonitrile Butadiene Styrene Composite Filled with Sunflower Seed (Helianthus Annuus L.) Husk Flour", Journal of Polymer Research, 27 (8) (2020) 219.
34. Emel KURAM, "UV and Thermal Weathering of Green Composites: Comparing the Effect of Different Agricultural Waste as Fillers", Journal of Composite Materials, 54 (24) (2020) 3683-3697.
35. Emel KURAM, "Rheological, Mechanical and Morphological Properties of Hybrid Hazelnut (Corylus Avellana L.)/Walnut (Juglans Regia L.) Shell Flour-Filled Acrylonitrile Butadiene Styrene Composite", Journal of Material Cycles and Waste Management, 22 (2020) 2107-2117.
36. Amin BAGHERZADEH, Emel KURAM, Erhan BUDAK, "Experimental Evaluation of Eco-Friendly Hybrid Cooling Methods in Slot Milling of Titanium Alloy", Journal of Cleaner Production, 289 (2021) 125817.
37. Emel KURAM, "Advances in Development of Green Composites Based on Natural Fibers : A Review", Emergent Materials, 5 (2022) 811-831.
38. Emel KURAM, “Synergistic Effect of Glass Bead and Glass Fiber on the Crystalline Structure, Thermal Stability, Mechanical, Rheological and Morphological Properties of Polyamide 6 Composites”, Journal of Composite Materials, 56 (3) (2022) 441-453.
39. Emel KURAM, "Multi-Objective Optimization of Tool Nose Radius and Machining Conditions Employing Taguchi-Based Grey Relational Analysis in Milling of AISI 304", Soft Computing, 27 (2023) 14861-14875.
B. Uluslararası Bildiriler
1. Emel KURAM, Babur OZCELIK, Erhan DEMIRBAS, Emrah ŞIK, "Effects of the Cutting Fluid Types and Cutting Parameters on Surface Roughness and Thrust Force", The World Congress on Engineering 2010, (WCE 2010), London, U.K., 30 June - 2 July 2010, Volume II, 1312-1315.
2. Emel KURAM, Bilgin Tolga SIMSEK, Babur OZCELIK, Erhan DEMIRBAS, Sule ASKIN, "Optimization of the Cutting Fluids and Parameters Using Taguchi and ANOVA in Milling", The World Congress on Engineering 2010, (WCE 2010), London, U.K., 30 June - 2 July 2010, Volume II, 1292-1296.
******************************************************************************************************************************************************************************************************************************************
3. Emel KURAM, "Recycling of Aged Glass-Fiber Reinforced Poly(oxymethylene) Composite", 16th International Materials Symposium, Denizli, Turkey, 12-14 October 2016.
4. Emel KURAM, "Micro-Milling of Unreinforced and Glass-Fiber Reinforced Polyamide Materials Manufactured by Injection Molding", 7th International Symposium on Machining, Marmara University, Istanbul, Turkey, 3-5 November 2016, 166-175.
5. Uğur EMİROĞLU, Emel KURAM, Erhan ALTAN, "Tornalamada Talaş Yan Akış Açısının Sonlu Elemanlar Analizi ve Deneysel Olarak Doğrulanması", 8th International Symposium on Machining, Antalya, Turkey, 2-4 November 2017, 62-70.
6. Hurol KOCOGLU, Mehmet DOGAN, Emel KURAM, Babur OZCELIK, "Effect of UV Ageing on Mechanical, Rheological and Morphological Properties of Polycarbonate", 4th International Conference on Advances in Mechanical Engineering, Istanbul, Turkey, 19-21 December 2018, 832-839.
7. Mehmet DOGAN, Hurol KOCOGLU, Emel KURAM, Babur OZCELIK, "Natural Ageing and Reprocessing of Aged Polycarbonate", 4th International Conference on Advances in Mechanical Engineering, Istanbul, Turkey, 19-21 December 2018, 840-851.
8. Serhat MERT, Emel KURAM, Mehmet DOGAN, Hurol KOCOGLU, Babur OZCELIK, "Accelerated Weathering and Reprocessing Effect on Mechanical, Rheological and Morphological Properties of PC/ABS Blend", International Symposium on Engineering Natural Sciences and Architecture, Kocaeli, Turkey, 2-4 May 2019, 262-266.
9. Emel KURAM, Hamza AYAS, Mert BAYRAKTAROGLU, Mehmet DOGAN, Hurol KOCOGLU, Babur OZCELIK, "Natural Ageing of Polycarbonate/Acrylonitrile-Butadiene-Styrene and Blending of Aged-Virgin Polycarbonate/Acrylonitrile-Butadiene-Styrene", 2nd International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevsehir, Turkey, 21-23 June 2019.
10. Hamza AYAS, Emel KURAM, Fevzi BEDIR, "Mechanical Properties of Acrylonitrile-Butadiene-Styrene under Effect of Water Ageing and Blending of Aged-Virgin Acrylonitrile-Butadiene-Styrene", 2nd International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevsehir, Turkey, 21-23 June 2019.
11. Hamza AYAS, Emel KURAM, Fevzi BEDIR, "Mechanical Properties of Acrylonitrile-Butadiene-Styrene under Effect of Thermal Ageing", 2nd International Conference on Life and Engineering Sciences, Istanbul, Turkey, 27-29 June 2019.
C. Uluslararası Kitap Bölümleri
1. Emel KURAM, Babur OZCELIK, Erhan DEMIRBAS, "Green Manufacturing Processes and Systems - Chapter 2 Environmentally Friendly Machining : Vegetable Based Cutting Fluids", Springer, ISBN: 978-3-642-33791-8, 2013, 23-47.
2. Emel KURAM, Babur OZCELIK, "Modern Mechanical Engineering Research, Development and Education - Chapter 12 Micro Milling", Springer, ISBN: 978-3-642-45175-1, 2014, 325-365.
******************************************************************************************************************************************************************************************************************************************
3. Emel KURAM, Zeynep Munteha SAHIN, "High Performance Polymers and Their Nanocomposites - Chapter 3 Polyamide 4,6, (PA4,6)", Wiley, ISBN: 978-1-119-36388-0, 2018, 59-103.
4. Emel KURAM, "Mineral-Filled Polymer Composites - Chapter 5 Ageing of Mineral-Reinforced Polymer Composites", Taylor and Francis Group, CRC Press, ISBN: 9781032116563, 2022, 85-110.
5. Emel KURAM, "Aging Effects on Natural Fiber-Reinforced Polymer Composites Durability and Life Prediction - Chapter 6 Degradation Effects of Completely Biodegradable Composites to Moisture Absorption and Water Aging", Springer, ISBN: 978-981-16-8359-6, 2022, 85-113.
6. Emel KURAM, "Advanced Composites in Aerospace Engineering Applications - Chapter 14 Hybrid Biocomposites : Utilization in Aerospace Engineering", Springer, ISBN:978-3-030-88191-7, 2022, 281-301.
7. Emel KURAM, "Polyester-Based Biocomposites Part of the Handbook of Epoxy-Based Biocomposites - Chapter 4 Agro Waste Based Epoxy Composites : Thermal and Mechanical Properties", Taylor and Francis Group, CRC Press, ISBN: 9781003271017, 2023, 67-100.
8. Emel KURAM, "Tribological Properties, Performance and Applications of Biocomposites - Chapter 6 Friction and Sliding Wear Properties of the Natural Fibre Reinforced Polypropylene Composites", Wiley, ISBN: 978-3-52783807-3, 2023, 75-104.
9. Emel KURAM, "Natural-Fiber Reinforced PLA Composites - Chapter 13 - PLA Based Biocomposites and Bionanocomposites in the Biomedical and Healthcare Applications", Elsevier, in Press.
10.Emel KURAM, "Artificial Intelligence in Manufacturing Engineering - Artificial Intelligence in 3D Printing Techniques for Medical and Other Applications", Elsevier, in Press.
D. Ulusal Makaleler
1. Babür ÖZÇELİK, Emel KURAM, Alparslan SERT, "Düzlem Yüzey Frezelemede Takım Tutucuları ve Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisi", Makine Teknolojileri Elektronik Dergisi, 8 (1) (2011) 1-13.
******************************************************************************************************************************************************************************************************************************************
2. Emel KURAM, "AISI 304 Paslanmaz Çeliğinin Frezelenmesinde Farklı Kaplama Malzemelerinin Takım Aşınmasına, Kesme Kuvvetlerine ve Yüzey Pürüzlülüğüne Etkileri", Politeknik Dergisi, 19 (4) (2016) 433-443.
3. Emel KURAM, "İnce Cidarlı Parçaların Mikro Frezelenmesinde Talaş Kaldırma Yolunun Takım Aşınması, Kuvvetler ve Parça Kalitesi Üzerindeki Etkisi", Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji, 4 (4) (2016) 293-298.
4. Emel KURAM, "Kesici Takım Bağlama Uzunluğunun Mikro Frezelemede Takım Aşınması, Kuvvetler ve Çapak Boyutu Üzerindeki Etkileri", Dokuz Eylül Üniversitesi-Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 19 (55) (2017) 229-237.
5. Emel KURAM, "Cam Elyaf Katkılı Poli(oksimetilen) Kompozitinin Laboratuar Ortamında ve Suda Yaşlandırılması Sonucunda Mekanik, Reolojik ve Morfolojik Özelliklerindeki Değişimler", Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji, 6 (4) (2018) 721-728.
6. Emel KURAM, "Tool Coating Effect on the Performance in Milling of Al2124 Aluminium Alloy", Dokuz Eylül Üniversitesi-Mühendislik Fakültesi Fen ve Mühendislik Dergisi, 21 (63) (2019) 749-760.
E. Ulusal Bildiriler
1. Babür ÖZÇELİK, Erhan DEMİRBAŞ, Emel KURAM, Emrah ŞIK, İbrahim N. TANSEL, "Geliştirilen Ayçiçeği ve Kanola Esaslı Bitkisel Soğutma Yağlarının AISI 304 Malzemenin Delinmesindeki Performansları", I. Ulusal Talaşlı İmalat Sempozyumu UTİS 2009, Yıldız Teknik Üniversitesi, İstanbul, 2-3 Ekim 2009, 121-129
2. Babür ÖZÇELİK, Erhan DEMİRBAŞ, Emel KURAM, Emrah ŞIK, "Geliştirilen Rafine Ayçiçek Yağı Esaslı Kesme Sıvısının Delmedeki Performansının Yüzey Pürüzlülüğü Yoluyla Araştırılması", V. Makina Tasarım ve İmalat Teknolojileri Kongresi, Konya, 17-18 Ekim 2009, 39-46.
3. M. Hüseyin ÇETİN, Babür ÖZÇELİK, Emel KURAM, B. Tolga ŞİMŞEK, Erhan DEMİRBAŞ, "Bitkisel Esaslı EP Katkılı Kesme Sıvılarıyla AISI 304L Çeliğin Tornalanmasında İlerleme Hızının Yüzey Pürüzlülüğü ve Kesme Kuvvetine Etkisi", 2. Ulusal Talaşlı İmalat Sempozyumu UTİS 2010, Selçuk Üniversitesi, Konya, 1-2 Ekim 2010, 92-107.
4. M. Hüseyin ÇETİN, Babür ÖZÇELİK, Emel KURAM, B. Tolga ŞİMŞEK, Erhan DEMİRBAŞ, "AISI 304L Çeliğin EP Katkılı Bitkisel Esaslı Kesme Sıvıları Kullanılarak Tornalanmasında İlerleme Hızının Aşınma Üstüne Etkisi", 2. Ulusal Tasarım İmalat ve Analiz Kongresi TİMAK 2010, Balıkesir, 11-12 Kasım 2010, 230-241.
5. Mehmet Metin MEDAR, Ali İhsan ALTAN, Enis TAŞCI, Emel KURAM, Babür ÖZÇELİK, Faruk YILMAZ, "Poliamit (Naylon-6) Malzemenin Geri Dönüşümünde Mekanik ve Kimyasal Özelliklerindeki Değişimler", IV. Ulusal Polimer Bilim ve Teknolojisi Kongresi, Çanakkale, 5-8 Eylül 2012, Sayfa : 38.
6. Enis TAŞCI, Ali İhsan ALTAN, Mehmet Metin MEDAR, Emel KURAM, Faruk YILMAZ, Babür ÖZÇELİK, "ABS Polimerinin Geri Dönüşümler Sonucunda Mekanik ve Kimyasal Özelliklerinin İncelenmesi", IV. Ulusal Polimer Bilim ve Teknolojisi Kongresi, Çanakkale, 5-8 Eylül 2012, Sayfa : 43.
******************************************************************************************************************************************************************************************************************************************
7. Emel KURAM, "Geri Dönüştürülmüş Polikarbonat/Akrilonitril Bütadien Stiren İkili Karışımının Mekanik ve Reolojik Özelliklerine Saf Akrilonitril Bütadien Stiren Katkısının Etkisi", VI. Ulusal Polimer Bilim ve Teknolojisi Kongresi, Ankara, 4-7 Eylül 2016.
F. Projeler
BAP
1.Farklı Takım Tutucuların Frezelemede Yüzey Pürüzlülüğü ve Takım Aşınmasına Etkisinin Araştırılması, Araştırmacı, Proje No : 2009-A20, Başlama - Bitiş Tarihi : 15.6.2009 - 15.12.2010, Bütçe : 9.000 TL.
2. Taguchi Metodu Kullanılarak Mikro Frezelemede Kesme Şartlarının Optimizasyonu, Araştırmacı, Proje No : 2012-A19, Başlama - Bitiş Tarihi : 25.6.2012 - 25.12.2013, Bütçe : 15.435 TL.
3. Titanyum ve Inconel Malzemelerin Mikro Frezeleme Şartlarının Araştırılması, Araştırmacı, Proje No : 2013-A22, Başlama - Bitiş Tarihi : 22.7.2013 - 22.01.2015, Bütçe : 8.175 TL.
******************************************************************************************************************************************************************************************************************************************
TÜBİTAK 1001
1. Polimerik Malzemelerin Hızlandırılmış Yaşlandırma ve Atmosferik Etkiler Altında Özelliklerinin İncelenmesi ve Yaşlandırılmış Polimerik Malzemelerin Mekanik Özelliklerinin İyileştirilmesi, Yürütücü, Proje No : 116M257, Başlama - Bitiş Tarihi : 01.3.2017 - 01.12.2019, Bütçe : 577.563 TL.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Yüksek Lisans
1. Hamza AYAŞ, "Doğal Ortamın, UV Işınının, Termal Çevrimlerin ve Suyun Bileşik Etkisi Altında Akrilonitril Bütadien Stiren Polimerinin Mekanik Özellikleri", II. Danışman, 2020.
2. Ozan SEREN, "Bir Ticari Araç Arka Aksının Tasarlanması, Modellenmesi ve Yorulma Analizi", Devam ediyor.
3. Ömer Gökalp AÇIKGÖZ, "Boron Malzemede Delik Delme İşlemlerinde Kesici Takım Uçlarının İncelenmesi ve Optimum Kesme Parametrelerinin Belirlenmesi", Devam ediyor.
4. Ensar POLAT, " Fiber Lazer ve Su Jeti ile Kesme İşlemlerinin Bakır Malzemesinin Ölçüsel ve Yüzey Kalitesi Üzerine Etkisi", Devam ediyor.
5. Arda İLGEZDİ, "Ramax Malzemenin Frezelenmesinde Taguchi Tabanlı Gri İlişkisel Analiz Kullanarak Çok Amaçlı Optimizasyon", Devam ediyor.
6. Fatih AYDINLI, "Tarımsal Kabuk Katkılı Polyamid 6 Kompozitlerinin UV Işını Altında Mekanik Özellikleri", Devam ediyor.
Lisans Bitirme Projeleri
1. Oğuzhan SERDAR, "Injection Mold Design and Analysis at SolidWorks", 2022.
2. Ömer BAĞLI, "Production of Agricultural Shell Reinforced Polymer Composite Material and its Mechanical Properties", 2023.
3. Mustafa TOKGÖZ, " The Effect of Extruder Operating Parameters on the Mechanical Properties of the Final Product Produced by Plastic Injection Molding", 2023.
4. Yusuf Süha KILIÇER, "Flow Analysis in Mold for Plastic Injection Molding", 2023.
-
Third Cycle (Doctoral): Gebze Teknik Üniversitesi
Doktora Sonrası Araştırma: Sabancı Üniversitesi - Second Cycle (Master's): Gebze Yüksek Teknoloji Enstitüsü
- First Cycle (Undergraduate): Marmara Üniversitesi