Doç. Dr.
Eda GOLDENBERG
Fizik
- Telefon
- (262) +90(262)6051342
- E-Posta
- edagoldenberg@gtu.edu.tr
- Ofis
- H Blok, 212
- Çalışma alanları
- İnce Film Uygulamaları, Fonksiyonel Kaplamalar, Plazma Teknolojileri, Yarıiletkenler, Malzeme Üretim ve Karakterizasyon
1.Hasan M. M., Alev O., Goldenberg E. and Cheffena M. “A Novel Molybdenum Disulfide-Based High-Precision Microwave Sensor for Methanol Gas Detection at Room Temperature” IEEE Microwave and Wireless Technology Letters, 1-4 (2024)
2.Alev O., Özdemir O., Arslan L.Ç., Goldenberg E. “Effect of process parameters on structural and optical properties of sputter deposited WS2 films” Vacuum 222, 113032 (2024)
3.Mitmit C. Goldenberg E., Tan EMM “Infrared wavelength-specific gas sensing with pyroelectricity at room temperature” Sensors and Actuators A: Physical, 114164 (2023)
4.Alev O, Goldenberg E., “Nanostructured MoS2 thin films: Effect of substrate temperature on microstructure, optical, and electrical properties” J.Vac.Sci.Technol.A 41, 033408 (2023) doi:10.1116/6.0002627
5.Alev O, Özdemir O, Goldenberg E., Arslan L.Ç., Büyükköse S., Öztürk ZZ., “WS2 thin film based quartz crystal microbalance gas sensor for dimethyl methylphosphonate detection at room temperature” Thin Solid Films 745, 139097 (2022)
6.Goldenberg E., Bayrak T., Mohammadmoradi O., “Electro-optical performances of nanostructured SrTiOx films: the effect of plasma power, Ar/O2 ratio and annealing” International Journal of Applied Ceramic Technology 18 (3), 631-642 (2021) IF: (2018 :1.170)
7.Bayrak T., Kizir S., Kahveci E., Biyikli N., and Goldenberg E., “Postdeposition annealing on RF-sputtered SrTiO3 thin films” Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 35, 021505 (2017)
8.Bayrak T., and Goldenberg E., “Growth and characterization of nanocrystalline SrTiOx films: room temperature deposition using RF sputtering system in a pure argon environment” Materials Research Express, Volume 4, Number 5 (2017)
9.Bayrak T., Ozgit-Akgun C., Goldenberg E., “Structural, optical and electrical characteristics BaSrTiOx thin films: Effect of deposition pressure and annealing”, Journal of Non-Crystalline Solids, 475, 76-84 (2017)
10.Biyikli N., Ozgit-Akgun C., Goldenberg E., Haider A., Kizir S., Uyar T., Bolat S., Tekcan B.,and Okyay A.K., “Hollow-Cathode Plasma-Assisted Atomic Layer Deposition: a Novel Route for Low-Temperature Synthesis of Crystalline III-Nitride Thin Films and Nanostructures” IEEE 35th International Conference on Electronics and Nanotechnology (ELNANO) 218 (2015)
11.Haider A., Kizir S., Ozgit C., Goldenberg E., Leghari S., Okyay A.K., Biyikli N. “Low-temperature grown wurtzite InxGa1-xN thin films via hollow cathode plasma-assisted atomic layer deposition” J. Mater. Chem. C, 3, 9620-9630 (2015)
12.Goldenberg E., Bayrak T., Ozgit-Akgun C., Haider A., Leghari S.A., Biyikli N., “Structural, Optical and Electrical Characteristics of SrTiO3 Thin Films Deposited by RF Magnetron Sputtering”, Thin Solid Films, 590, 193–199 (2015)
13.Ozgit-Akgun C., Kayaci F., Vempati S., Haider A., Celebioglu A., Goldenberg E., Kizir S., Uyar T., Biyikli N., “Fabrication of flexible polymer-GaN core-shell nanofibers by the combination of electrospinning and hollow cathode plasma-assisted atomic layer deposition” J. Mater. Chem. C, 3, 5199-5206 (2015)
14.Zukerman I., Goldenberg E., Zhitomirsky V.N., Raveh A., BoxmanR.L., “Thermal stability of Filtered Vacuum Arc Deposited Er2O3 coatings” Journal of Coating Science and Technology, 2(1), 13-19 (2015) 
15.Ozgit-Akgun C., Goldenberg E., Bolat S., Tekcan B., Kayaci F., Uyar T., Okyay A.K., Biyikli N., “Low-temperature hollow cathode plasma-assisted atomic layer deposition of crystalline III-nitride thin films and nanostructures” Physica Status Solidi C 12 (4‐5), 394-398 (2015)
16.Haider A., Ozgit-Akgun C., Goldenberg E., Okyay A.K., Biyikli N., “Low-Temperature Deposition of Hexagonal Boron Nitride Via Sequential Injection of Triethylboron and N2/H2 Plasma” Journal of the American Ceramic Society 97 (12), 4052-4059 (2014)
17.Ozgit-Akgun C.,  Goldenberg E., Okyay A.K., and Biyikli N.,  “Hollow cathode plasma-assisted atomic layer deposition of crystalline AlN, GaN and AlxGa1-xN thin films at low temperatures” J. Mater. Chem. C, 2 2123 (2014), DOI: 10.1039/C3TC32418D
18.</span>Goldenberg E., Ozgit-Akgun C.,  Biyikli N., and  Okyay A.K., “Optical characteristics of nanocrystalline AlxGa1xN thin films deposited by hollow cathode plasma-assisted atomic layer deposition” Journal of Vacuum Science & Technology A 32, 031508 (2014); doi: 10.1116/1.4870381
19.Çetinörgü-Goldenberg E., Burstein L., Chayun-Zucker I., Avni R., Boxman R.L “Structural and Optical Characteristics of Filtered Vacuum Arc Deposited N:TiOx Thin Films” Thin Solid Films 537 28–35 (2013).
20.Çetinörgü-Goldenberg E., Klemberg-Sapieha J.E., Martinu L. “Effect of post-deposition annealing on the structure, composition, and the mechanical and optical characteristics of niobium and tantalum oxide films” Applied Optics 51(27) 6498-6507 (2012).
21.</span>Goldberg O., Goldenberg E., Zhitomirsky V.N., Cohen S., Boxman R.L., “Zirconium vacuum arc operation in a mixture of Ar and O2 gases: Ar effect on the arcing characteristics, deposition rate and coating properties” Surf. Coat. Technol. 206(21) 4417 (2012)
22.Çetinörgü-Goldenberg E., Baloukas B., Zabeida O., Klemberg-Sapieha J. and Martinu L. “Optical and Tribo-Mechanical Stability of Optically Variable Interference Security Devices Prepared by Dual Ion Beam Sputtering” Applied Optics 50(19) 3351 (2011).
23.Çetinörgü E., Geron N., Goldsmith S., Boxman R.L., “Phase determination of filtered vacuum arc deposited TiO2 thin films by optical modeling” Thin Solid Films 518(4) 1060 (2009).
24.Çetinörgü E., Baloukas B., Zabeida O., Klemberg-Sapieha J.E., Martinu L., “Mechanical and thermo-elastic characteristics of optical thin films deposited by dual ion beam sputtering” Applied Optics 48(23) 4536 (2009).
25.Çetinörgü E., “A new method to experimentally determine the thermal expansion coefficient, Poisson’s ratio and Young’s modulus of thin films” J. Materials Science 44(8) 2167 (2009).
26.Goldsmith S., Çetinörgü E., Boxman R.L., “Modeling the optical properties of tin oxide thin films” Thin Solid Films 517 5146 (2009)
27.Zhitomirsky V.N. Çetinörgü E., Boxman R.L., Goldsmith S., “Properties of SnO2 films fabricated using a rectangular filtered vacuum arc plasma sources” Thin Solid Films 516(15) 5079 (2008).
28.Çetinörgü E., “Characteristics of filtered vacuum arc deposited ZnO-SnO2 thin films on room temperature substrates” Optics Communications 280(1) 114 (2007).
29.Çetinörgü E., Goldsmith S., “Chemical and thermal stability of the characteristics of filtered vacuum arc deposited ZnO, SnO2 and zinc stannate thin films” J. Phys. D:Appl. Phys. 40(17) 5220 (2007)
30.Çetinörgü E., Gümüş C., Goldsmith S., Mansur F., “Optical and structural characteristics of tin oxide thin films deposited by filtered vacuum arc and spray pyrolysis” Phys. Stat. Sol. (a) 204(10) 3278 (2007).
31.Çetinörgü E., Goldsmith S., Boxman R.L., “The post-deposition annealing on the optical properties of filtered vacuum arc deposited ZnO-SnO2” J. Appl. Phys.:Cond. Matter 19(25) 256206 (2007).
32.Çetinörgü E., Goldsmith S., Rosenberg Yu., Boxman R.L., “Influence of annealing on the physical properties of filtered vacuum arc deposited tin oxide thin films” J. Non-Crystalline Solids 353(26) 2595 (2007).
33.Çetinörgü E., Goldsmith S., Boxman R.L., “The effect of annealing on filtered vacuum arc deposited ZnO thin films” Surf. Coat. Technol. 201(16-17) 7266 (2007).
34.Çetinörgü E., Goldsmith S., Boxman R.L., “The effect of substrate temperature on filtered vacuum arc deposited zinc oxide and tin  oxide thin films”  J. Crystal Growth 299 259-267 (2007).
35.Çetinörgü E., Goldsmith S., Barkay Z., Boxman R.L., “The dependence of filtered vacuum arc deposited ZnO-SnO2 thin films characteristics on substrate temperature” J. Phys. D:Appl. Phys. 39 5245 (2006).
36.Zhitomirsky V.N., Çetinörgü E., Adler E., Rosenberg Yu., Boxman R.L., Goldsmith S., “Filtered vacuum arc deposition of transparent conducting Al-doped ZnO films” Thin Solid Films 515(3) 885 (2006).
37.Çetinörgü E., Goldsmith S., Boxman R.L., “Air annealing effects on the optical properties of ZnO-SnO2 thin films deposited by a filtered vacuum arc deposition system” Semicond. Sci. Technol. 21 364 (2006).
38.Çetinörgü E., Goldsmith S., Boxman R.L., “Optical properties  of ZnO- SnO2 thin films deposited by filtered vacuum arc” J. Phys. D: Appl. Phys., 39(9) 1878 (2006).
39.Çetinörgü E., Gümüş C., Esen R., “Air annealing effects on the optical properties of chemical bath deposited CdS films” Thin Solid Films 515(4) 1688 (2006).
40.Çetinörgü E., Goldsmith S., Zhitomirsky V., Boxman R.L., Bungay C.L., “Optical characterization of ZnO thin films deposited by filtered vacuum arc system” Semicond. Sci. Technol. 21 1303-1310 (2006).
41.Çetinörgü E., Goldsmith, S. and Boxman, R.L., “Effect of deposition conditions on the characteristics of ZnO-SnO2 thin tilms deposited by filtered vacuum arc” Thin Solid Films 515(3) 880 (2006).
1.Hürgül Cengiz “Magnetron Saçtırma Tekniği ile Büyütülen MoS2 İnce Filmlerin Optik Karakterizasyonu” Gebze Technical University, Master of Science in Physics (2024)
-
Doktora: Çukurova University (Türkiye), Department of Physics (2007)
-
Yüksek lisans: Çukurova University (Türkiye), Department of Physics (2001)
-
Lisans: Çukurova University (Türkiye), Department of Physics (1999)
Doktora Sonrası AraştırmacıEcole Polytechnique of Montreal(2007-2009)
Doktora Sonrası Araştırmacı/Öğretim Görevlisi:Tel Aviv Üniversitesi (2009-2013)
Doktora Sonrası Araştırmacı Bilkent Üniversitesi UNAM (2013-2016)
Şişecam Bilim ve Teknoloji Merkezinde Kaplama Bölümü Danışman (2017-2018)
İstanbul Okan Üniversitesi Makina Mühendisliği Dr. Öğretim Üyesi (2018-2019)
Araştırmacı Sabancı Üniversitesi SUNUM (2019-2021)