gtu_logo

Prof. Dr. Hüseyin YILMAZ
Malzeme Bilimi ve Mühendisliği

Hüseyin YILMAZ
Telefon
(262) 605 26 38
E-Posta
h.yilmaz@gtu.edu.tr
Ofis
GE Blok, Malzeme Bil. & Müh. Binası, 219
Çalışma alanları
Seramik üretim süreçleri Kolloid kimyası Elektroseramikler (Dielektrik, ferroelektrik, ve yarı-iletken seramikler) Doku uluşumu Karbon fiber takviyeli plastikler Nano termal analiz
Detaylı özgeçmiş
hy_30_10_2024 Tr.pdf

Journal Article

  1. KAFKASLIOĞLU YILDIZ BETÜL, YILDIZ ALİ SUAT, KUL MEHMET, TÜR YAHYA KEMAL, IŞIK ELİF, DURAN CİHANGİR, YILMAZ HÜSEYİN (2024). Mechanical properties of 3D-printed Al2O3 honeycomb sandwich structures prepared using the SLA method with different core geometries. Ceramics International, 50(2), 2901-2908., Doi: 10.1016/j.ceramint.2023.11.028

  2. YILMAZ HÜSEYİN, BÜYÜKAKSOY ALİGÜL, UCUN TUĞÇE, MURUTOĞLU MURAT, ÖZSARAÇ UĞUR, GÜNHAN BÜŞRA, Alkan Gultekin Aygul (2023). One step densification of SDC—Na2CO3 nanocomposite electrolytes for SOFC applications by cold sintering process. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 106(11), 6379-7140., Doi: 10.1111/jace.19294

  3. MURUTOĞLU MURAT, UCUN TUĞÇE, Ulaşan Özge, BÜYÜKAKSOY ALİGÜL, TÜR YAHYA KEMAL, YILMAZ HÜSEYİN (2022). Cold sintering-assisted densification of GDC electrolytes for SOFC applications. International Journal of Hydrogen Energy, 47, 19772-19779., Doi: 10.1016/j.ijhydene.2022.01.043

  4. KARDEŞ MEMNUNE, YILMAZ HÜSEYİN, ÖZTÜRK KORAY (2022). Pure and cerium-doped ZnO nanorods grown on reticulated Al2O3 substrate for photocatalytic degradation of Acid Red 88 azo dye. Ceramics International, 48(5), 7093-7105., Doi: 10.1016/j.ceramint.2021.11.269

  5. UCUN TUĞÇE, MURUTOĞLU MURAT, Ulaşan Özge, DEMİRKAL EMRAH, BÜYÜKAKSOY ALİGÜL, TÜR YAHYA KEMAL, YILMAZ HÜSEYİN (2021). Cold Sintering of Anode-Supported 8YSZ/NiO-8YSZ Bilayers for Solid Oxide Fuel Cells. ACS Applied Energy Materials, 4(12), 13748-13758., Doi: 10.1021/acsaem.1c02483

  6. Yıldız Kafkaslıoğlu Betül,YILMAZ HÜSEYİN,TÜR YAHYA KEMAL (2019). Evaluation of mechanical properties of Al2O3–Cr2O3 ceramic system prepared in different Cr2O3 ratios for ceramic armour components. Ceramics International, 45(16), 20575-20582., Doi: 10.1016/j.ceramint.2019.07.037

  7. BERKSOY YAVUZ AYŞE,MENŞUR ALKOY EBRU,Gozutok Ebru,Dursun Sinan,YILMAZ HÜSEYİN,ALKOY SEDAT (2019). Structural and electrical properties of ⟨001⟩ textured 0.26PIN–0.40PMN–0.34PT ternary system. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 30(20), 18548- 18556., Doi: 10.1007/s10854-019-02208-w

  8. YILMAZ HÜSEYİN,TÜR YAHYA KEMAL,Kafkaslıoğlu Yıldız Betül (2019). Influence of nickel addition on the microstructure and mechanical properties of Al2O3-5volZrO2 ceramic composites prepared via precipitation method. International Journal of Minerals Metallurgy and Materials, 26(7), 908-914., Doi: 10.1007/s12613-019-1792-y

  9. AKÇA ERDEM,YILMAZ HÜSEYİN (2019). Lead-free potassium sodium niobate piezoceramics for high-power ultrasonic cutting application: Modelling and prototyping. Processing and Application of Ceramics, 13(1), 65-78., Doi: 10.2298/PAC1901065A

  10. KAFKASLIOĞLU YILDIZ BETÜL,YILMAZ HÜSEYİN,TÜR YAHYA KEMAL (2018). Processing and mechanical characterization of Al2O3/Ni and Al2O3/C0 composites by pressureless sintering of nanocomposite powders. Processing and Application of Ceramics, 12(2), 123-128., Doi: 10.2298/PAC1802123K

  11. D. Kırsever, ve H. Yılmaz, “Electrical Properties of Lead Free Na1/2Bi1/2TiO3 Relaxor Ferroelectric Ceramics Doped with Hafnium or Zirconium,” Journal of the American Ceramic Society, 98[6],1858-64, (2015).

  12. E. Akça, ve H. Yilmaz, “Sintering behavior and electrical properties of K4CuNb8O23 modified K0.5Na0.5NbO3 ceramics with SnO2, ZnO or Yb2O3 doping,” Ceramics International, 41[3], 3659-67, Part A (2015).

  13. C. Efe, H. Yilmaz, Y. K. Tur, ve C. Duran, “Mechanical Property Characterization of Na1/2Bi1/2TiO3-BaTiO3 Ceramics,” International Journal of Chemical Engineering and Applications, 5[5], 429-32 (2014).

  14. H. Yilmaz, Y. Imai, K. Nagata, K. Sato, ve Y. Hotta, "Localized Thermal Analysis of Carbon Fiber Reinforced Polypropylene Composites," Polymer Composites, 33[10], 1764-69 (2012).

  15. K. Sato, H. Yilmaz, A. Ijuin, Y. Hotta, ve K. Watari, "Acetic acid mediated interaction between alumina surfaces," Applied Surface Science, 258[8], 4011-15 (2012).

  16. H. Yilmaz, K. Sato, K. Sato, Y. Hotta, ve K. Watari, “Lateral and Normal Forces in Polymer-Mediated Interaction of Alumina Surfaces,” Journal of the American Ceramic Society, 94[11], 3761-67 (2011).

  17. H. Yilmaz, K. Sato, K. Sato, Y. Hotta, ve K. Watari, "Methyl cellulose bridging between alumina surfaces," Journal of the Ceramic Society of Japan, 118[4], 314-317 (2010).

  18. E. Akça, H. Yilmaz, ve C. Duran, “Processing and Electrical Properties in Lead-Based (Pb(Mg1/3Nb2/3)O3, Pb(Yb1/2Nb1/2)O3, PbTiO3) Systems,” Journal of the American Ceramic Society, 93[1], 28-31 (2010).

  19. K. Sato, Y. Hotta, H. Yilmaz, K. Sato, ve K. Watari, “Fluidity of Methyl Cellulose-Contained Suspensions and Pastes Prepared from Differently Milled Al2O3 Powder,” Journal of Colloid and Interface Science, 331[1], 221-226 (2009).

  20. K. Sato, Y. Hotta, H. Yilmaz, ve K. Watari, “Fabrication of Green and Sintered Bodies Prepared by Centrifugal Compaction Process Using Wet-jet Milled Slurries,” Journal of the European Ceramic Society, 29[8], 1323-1329 (2009).

  21. Y. Hotta, T. Shirai, K. Sato, H. Yilmaz, ve K. Watari, “Hydrodynamic Interaction of Particles in Al2O3 Slurries Prepared by Different Milling Methods,” Journal of the American Ceramic Society, 92[6], 1198-202 (2009).

  22. 12. H. Yilmaz, K. Sato, ve K. Watari, “Ion-Specific Interaction of Alumina Surfaces,” Journal of the American Ceramic Society, 92[2], 318-322 (2009).

  23. K. Sato, H. Yilmaz, Y. Hotta, A. Ijuin, ve K. Watari, “Dispersion of Ceramic Particles in Aqueous Media with Surface Grafted-Dispersant,” Journal of the American Ceramic Society, 92[1], 256-259 (2009).

  24. A.A. Gültekin, ve H. Yılmaz, “Processing and Electrical Properties of (1-x)[(1-y)(Pb(Mg1/3Nb2/3)O3)–y(Pb(Yb1/2Nb1/2)O3)]–xPbTiO3 Ceramics,” Materials Letters, 63[6-7], 584-586 (2009).

  25. Y. Hotta, H. Yilmaz, T. Shirai, K. Ohota, K. Sato, ve K. Watari, “State of the Dispersant and Particle Surface During Wet-Jet Milling for Preparation of a Stable Slurry,” Journal of the American Ceramic Society, 91[4], 1095-1101 (2008).

  26. C. Duran, H. Göçmez ve H. Yılmaz, “Dispersion of Mechanochemically Activated SiC and Al2O3 Powders,” Materials Science and Engineering A – Structural Materials Properties Microstructure and Processing, 475[1-2], 23-26 (2008).

  27. H. Yilmaz, K. Sato, ve K. Watari, “Normal and Lateral Interaction of alfa-alumina in Different Electrolyte Solutions,” Materials Science and Engineering B - Solid State Materials for Advanced Technology, 148[1-3], 215-220 (2008).

  28. H. Kaga, Y. Kinemuchi, H. Yilmaz, K. Watari, H. Nakano, H. Nakano, S. Tanaka, A. Makiya, Z. Kato, ve K. Uematsu, “Orientation Dependence of Transport Property and Microstructural Characterization of Al-doped ZnO Ceramics,” Acta Materialia, 55[14], 4753-4757 (2007).

  29. H. Yilmaz, K. Sato, ve K. Watari, “AFM Interaction Study of alfa-alumina Particle and c-sapphire Surfaces at High Ionic Strength Electrolyte Solutions,” Journal of Colloid and Interface Science, 307[1], 116-123 (2007).

  30. H. Yilmaz, T. Isobe, Y. Hotta, K. Sato, ve K. Watari, “Polyelectrolyte Mediated Interaction of Alumina in Wet Jet Milled Slurry/Ball Milled Slurry Supernatants,” Journal of the Ceramic Society of Japan, Special Issue by Guest Editors Dedicated to Prof. Günter Petzow: Modern Trends in Advanced Ceramics: Notes, 114 [11], pp. 1100-2 (2006).

  31. G.L. Messing, S. Trolier-McKinstry, E.M. Sabolsky, C. Duran, S. Kwon, B. Brahmaroutu, P. Park, H. Yilmaz, P.W. Rehrig, K.B. Eitel, E. Suvaci, M. Seabaugh, ve K.S. Oh, “Templated Grain Growth of Textured Piezoelectric Ceramics,” Critical Reviews in Solid State and Materials Sciences, 29[2], 45-96 (2004).

  32. H. Yilmaz, G.L. Messing, ve S. Trolier-McKinstry, “(Reactive) Templated Grain Growth of Textured Sodium Bismuth Titanate (Na1/2Bi1/2TiO3-BaTiO3) Ceramics - II Elelectric and Piezoelectric Properties,” Journal of Electroceramics, 11[3], 217-226 (2003).

  33. H. Yilmaz, G.L. Messing, ve S. Trolier-McKinstry, “(Reactive) Templated Grain Growth of Textured Sodium Bismuth Titanate (Na1/2Bi1/2TiO3-BaTiO3) Ceramics - I Processing,” Journal of Electroceramics, 11[3], 207-215 (2003).

UCUN TUĞÇE, (2021). Anot destekli YSZ/NiO-YSZ katı oksit yakıt hücrelerinin soğuk sinterleme ile üretilmesi, (Tamamlandı)


TEBER MERVE, (2018). Katkılandırılmış PNN-PZT piezoelektrik seramiklerin toz sentezi, sinterlenmesi ve elektriksel karakterizasyonu, (Tamamlandı)


MURUTOĞLU MURAT, (2018). Çevre dostu KNN piezoseramiklerine katkılandırılmanın ve sinterleme;atmosferinin etkisi, (Tamamlandı)


DURSUN BURCU, (2011). Kurşun esaslı ferroelektrik seramiklerde dopant etkisi ve karakterizasyonu, (Tamamlandı)


ERDAĞ İSTEK, (2010). Kurşun esaslı elektronik seramiklerin dielektrik, piezoelektrik ve veelektromekanik özelliklerinin karakterizasyon;(Tamamlandı)


AKALP DERYA, (2010). Kurşun içermeyen ve kurşun esaslı ferroelektrik seramiklerin elektriksel karakterizasyonu, (Tamamlandı)


ALKAN GÜLTEKİN AYGÜL, (2006). Kurşun esaslı yeni ferroelektrik malzemelerin üretimi ve karakterizasyonu, (Tamamlandı)


YURDAL KAĞAN, (2004). Ferroelektrik KSr2Nb5O15 seramiklerinde şablon parçacıklar kullanılarak doku oluşturulması, (Tamamlandı)


MURUTOĞLU MURAT, (2023). Cold Sintering of Alkaline Nano-composite Electrolytes for SOFC Applications, (Devam Ediyor)


AKÇA ERDEM, (2016). Çevre dostu KNN ferroelektrik seramiklerin yüksek güç ultrasonik uygulamalar için modifikasyonu,(Tamamlandı)


  • Doktora: Malzeme Bilimi ve Mühendisliği, The Pennsylvania State University, 2002
  • Yüksek lisans: Metalurji ve Malzeme Mühendisliği, Orta Doğu Teknik Üniversitesi, 1997
  • Lisans: Metalurji Mühendisliği, Orta Doğu Teknik Üniversitesi, 1994
2015- Prof. Dr.
Gebze Teknik Üniversitesi

2011-2015 Doç. Dr.
Gebze Yüksek Teknoloji Enstitüsü

2010-2011 Misafir Araştırıcı
Inorganic Based Plastics Group, Advanced Manufacturing
Research Institute, National Institute of Advanced Industrial
Science and Technology, AIST, Japan

2006-2008 Doktora Sonrası Çalışması
Advanced Sintering Technology Group, Advanced Manufacturing
Research Institute, National Institute of Advanced Industrial
Science and Technology, AIST, Nagoya, Japan

2003-2011 Yrd. Doç. Dr.
Gebze Yüksek Teknoloji Enstitüsü