Uluslararası hakemli dergilerde yayımlanan makaleler :

Söylev TA (2020). The investigation of the validity of a single k-value for fly ash in the range of W/C ratio critical for the standards. Construction and Building Materials 245, June 2020.

Özyurt N, Söylev TA, Özturan T, Pehlivan AO, Niş A (2020). Corrosion and chloride diffusivity of reinforced concrete cracked under sustained flexure. Teknik Dergi 31(6).

Söylev TA, Özturan T (2014). Durability, physical and mechanical properties of fiber-reinforced concretes at low-volume fraction. Construction and Building Materials 73 (December 2014):67-75.

Söylev TA (2011). The effect of fibers on the variation of bond between steel reinforcement and concrete with casting position. Construction and Building Materials 25(4):1736-1746.

Söylev TA, Richardson MG (2008). Corrosion inhibitors for steel in concrete: State-of-the-art report. Construction and Building Materials 22(4):609-622.

Söylev TA, McNally C, Richardson MG (2007). Effectiveness of amino alcohol-based surface-applied corrosion inhibitors in chloride-contaminated concrete. Cement and Concrete Research 37(6):972-977.

Söylev TA, McNally C, Richardson MG (2007). The effect of a new generation surface-applied organic inhibitor on concrete properties. Cement and Concrete Composites 29(5):357-364.

Söylev TA, François R (2006). Effects of bar-placement conditions on steel-concrete bond. Materials and Structures 39(2):187-195.

Söylev T.A., François R. (2005). Corrosion of reinforcement in relation to presence of defects at the interface between steel and concrete. Journal of Materials in Civil Engineering-ASCE; 17(4):447-455.

Söylev TA, François R (2003). Quality of steel-concrete interface and corrosion of reinforcing steel. Cement and Concrete Research 33(9):1407-1415.

Uluslararası bilimsel toplantılarda sunulan ve bildiri kitabında (Proceedings) basılan bildiriler :

Asan M, Saltaş N, Söylev TA (2020), "Investigation of the strength development of concretes containing waste glass powder at different cement replacement ratios", 5th EURASIA Waste Management Symposium, İstanbul.

Söylev TA, Özturan T (2018), “Compressive strength development of fly ash concretes cured under different conditions” SynerCrete’18 International Conference on Interdisciplinary Approaches for Cement-based Materials and Structural Concrete, Funchal, Madeira Adası, Portekiz.

Söylev TA (2017), Durability performance of fly ash concrete with prescribed and measured k-values, 2nd International RILEM/COST Conference on Early Age Cracking and Serviceability in Cement-based Materials and Structures (EAC2), Brüksel, Belçika

Söylev TA (2016). Comparison of mesured and prescribed
k-values for the equivalent performance of fly ash concrete, International
RILEM Conference on Materials, Systems and Structures in Civil Engineering
Conference segment on Service Life of Cement-Based Materials and Structures,
Technical University of Denmark, Lyngby, Danimarka

Söylev TA, Özturan T (2013). SMAR 2013 konferansı dahilinde “Strenght and Fracture Toughness of Fiber Reinforced Concrete” of The Second Conference on Smart Monitoring, Assessment, and Rehabilitation of Civil Structures, SMAR 2013, İstanbul.

Söylev TA, Özturan T (2012). ASPIC 2012 konferansı dahilinde “Proceedings of the 7th Asian Symposium on Polymers in Concrete” bildiri kitapçığındaki “Effect of polypropylene fibers on freeze-thaw resistance, surface scaling and flexural toughness of concrete”, 737-744 pp., İstanbul.

Niş A, Söylev TA, Pehlivan AO, Özyurt Zihnioğlu N, Özturan T (2012). Effect of crack opening under cyclic loading on the reinforcement corrosion in concrete with and without steel fiber. The European Corrosion Congress, EUROCORR 2012, İstanbul.

Richardson MG, Grimes E, McNally C, Söylev TA (2005). Significance of the relative concentration of chloride and corrosion inhibitor in the repair of concrete highway structures. In: Alexander MG, Beushausen HD, Dehn F, Moyo P, editors. Proceedings of the International Conference on Concrete Repair Rehabilitation and Retrofitting (ICCRRR), Cape Town, sayfa: 315-317. Yayınevi: Taylor & Francis, Londra, 2006.

Grimes E, McNally C, Richardson MG, Söylev TA (2004). The influence of the relative concentration of chloride and corrosion inhibitor in the repair of concrete bridges: a report on work in progress. Bridge Engineering Research in Ireland, Proceedings of the 2004 Symposium. Queen’s University Belfast.

Ulusal hakemli dergilerde yayımlanan makaleler :

Söylev TA, François R (2001). Défauts d’adhérence acier-béton dus au ressuage et au tassement du béton frais. Annales du Bâtiment et des Travaux Publics, nº6 : 25-34 (FRANSA).

Ulusal bilimsel toplantılarda sunulan ve bildiri kitaplarında basılan bildiriler:

Pehlivan AO, Niş A, Söylev TA, Özyurt Zihnioğlu N, Özturan T (2013). Beton 2013 Kongresi dahilinde “Hazır Beton Kongresi Bildirileri” bildiri kitapçığındaki “Donma-çözülme etkisine maruz kalmış çatlaklı betonların korozyon direnci”, 105-114 pp., İstanbul.

Söylev TA, Özturan T (2011). Beton 2011 Kongresi dahilinde “Hazır Beton Kongresi Bildirileri” bildiri kitapçığındaki “Liflerin donatı korozyonuna etkisi ve lif katkılı betonarme yapıların korozyona karşı ömür döngü maliyet analizi”, 481-490 pp., İstanbul.

Söylev TA, Özturan T (2011). 8. Ulusal Beton Kongresi dahilinde “Beton Kongresi Bildirileri” bildiri kitapçığındaki “Çelik ve polipropilen liflerin betonun mekanik ve dayanıklılık özelliklerine etkisi”, 425-434 pp., İzmir.

Niş A, Pehlivan AO, Akça AH, Özyurt Zihnioğlu N, Söylev TA, Özturan T (2011). 8. Ulusal Beton Kongresi dahilinde “Beton Kongresi Bildirileri” bildiri kitapçığındaki “Donatı korozyonu için verilen sınır değerlerin yalın ve çelik lifli betonlarda çatlak oluşumu açısından değerlendirilmesi”, 257-266 pp., İzmir.

Söylev TA (2004). Beton 2004 Kongresi dahilinde “Hazır Beton Kongresi Bildirileri” bildiri kitapçığındaki “Çelik-Beton arayüz kalitesinin incelenmesi”, 67-76 pp., İstanbul.

Diğer yayınlar :

Öztunalı İ, Söylev TA (2004). Yapı Malzemelerinde CE İşaretlemesi için Rehber. İstanbul Kültür Üniversitesi Yayınları No: 36, Istanbul, 108 sayfa.

Go to CourseWeb pages

• CE 231 Materials Science for Civil Engineers
• CE 232 Construction Materials
• CE 331 Concrete Technology
• CE 332 Durability of Concrete
• CE 533 Strength and Deformation of Structural Concrete
• CE 534 Non-destructive Testing and Evaluation
• CE 632 Reinforcement Corrosion in Concrete
• CEET 511 Non-Destructive Testing and Evaluation of Concrete
• CEET 512 Strength and Deformation of Structural Concrete

Levent Yalçın "Atık Cam Tozu k-Değerlerinin Betonun Mekanik Özelliklerine Etkisi"&#160;</span>Gebze Teknik Üniversitesi İnşaat Mühendisliği ABD İnşaat Mühendisliği YL Programı Yüksek Lisans Tezi, Ocak 2021.</span>

Beyza Aygün "Atık Cam Tozu k-Değerlerinin Betonun Dayanıklılık Özelliklerine Etkisi"&#160;</span></span>Gebze Teknik Üniversitesi İnşaat Mühendisliği ABD İnşaat Mühendisliği YL Programı Yüksek Lisans Tezi, Ocak 2021.</span>

Nevzat Saltaş “Farklı oranlarda çimentonun yerine kullanılan atık cam tozunun taze betona ve sertleşmiş betonun mekanik özelliklerine etkisi” Gebze Teknik Üniversitesi İnşaat Mühendisliği ABD Deprem ve Yapı YL Programı Yüksek Lisans Tezi, Ekim 2019.

Ömer Karadağ "Standart ve ölçülmüş k‐değerlerine göre uçucu kül içeren betonların donatı korozyonuna karşı eşdeğer dayanıklılık performanslarının karşılaştırılması" Gebze Teknik Üniversitesi İnşaat Mühendisliği ABD Deprem ve Yapı YL Programı Yüksek Lisans Tezi, Temmuz 2018.

Anıl Niş “Investigation of of rebar corrosion in plain and steel reinforced concrete under static and dynamic loading” Boğaziçi Üniversitesi İnşaat Mühendisliği Bölümü Yüksek Lisans Tezi, Eylül 2011 (Eşdanışman).

Alexandros Dimoutsis “Effect of fiber type on mechanical properties and durability aspects of fiber reinforced concrete” Boğaziçi Üniversitesi İnşaat Mühendisliği Bölümü Yüksek Lisans Tezi, Haziran 2009. (Eşdanışman)

• Third Cycle (Doctoral): INSA de Toulouse/Fransa Laboratoire Matériaux et Durabilité des Constructions
• Second Cycle (Master's): Boğaziçi Üniversitesi İnşaat Mühendisliği Yapı Malzemeleri
• First Cycle (Undergraduate): Boğaziçi Üniversitesi İnşaat Mühendisliği

Projects

Scientific Research Project. Project title: "The Assessment of the Potential of Waste Glass Powder as a Partial Cement Replacement Material in Concrete According to the Requirements of TS EN 206 Concrete Standard". Project no: BAP 2018-A-105-63. Project duration: June 2018 - May 2020. Project Director

COST TU 1404 Action Member(2015-2018) (Towards the next generation of standards for service life of cement based materials) and Reseacher in the Round Robin Testing

Scientific Research Project. Project title: "Comparison of prescribed and measured k-values for the determination of equivalent performance of fly ash concrete". Project no: BAP 2016-A-31. Project duration: August 2016 - February 2019. Project Director

TÜBİTAK (The Scientific and Technological Research Council of Turkey) Project Title: “Evaluation of threshold values given in TS EN 206 for reinforcement corrosion in plain and steel fibre reinforced concrete considering crack formation and propagation”. Project No: 110M264. Project Duration: November 2010 – March 2013. Researcher

TÜBİTAK. Project Title: “Effect of fibers on reinforcement corrosion and life cycle cost analysis of fibre reinforced concrete structures”. Project no: 107M623. Project Duration: February 2008-April 2009. Project Director

European Commission 5th Framework Programme, SAMARIS Project (Sustainable Materials for Road Infrastructure), University College Dublin, İreland. Project Title: “Surface applied corrosion inhibitors”. Project Director: Dr. Mark Richardson. Project Duration: September 2004 - December 2005. Postdoctoral Researcher