SOYDAN ALİ MURAT,Yıldız Ömer,DURĞUN ABDULLATİF,akduman osman yağız,ATA ALİ (2019).
Production, performance and cost analysis of anode-supported NiO-YSZ micro-tubular SOFCs.
International Journal of Hydrogen Energy

Sevinc Serkan,TEKİN BURAK,ATA ALİ,Morcrette Mathieu,Perrot Hubert,Sel Ozlem,DEMİR ÇAKAN
REZAN (2019). In-situ tracking of NaFePO4 formation in aqueous electrolytes and its
electrochemical performances in Na-ion/polysulfide batteries. Journal of Power Sources

Dursun, B; Topac, E ; Alibeyli, R; Ata, A; Ozturk, O; Demir-Cakan, R. Fast microwave synthesis of SnO2@graphene/N-doped carbons as anode materials in sodium ion batteries. JOURNAL OF ALLOYS AND COMPOUNDS (2017)

Ceylan Cengiz, E., Erdol, Z., Sakar, B., Aslan, A., Ata, A., Ozturk, O.,Demir-Cakan, R. (2017). Investigation of the Effect of Using Al2O3–Nafion Barrier on Room-Temperature Na–S Batteries. The Journal of Physical Chemistry C, 121(28), 15120-15126.

Uzunoglu, A., Ahsen, A. S., Dundar, F., Ata, A.,Ozturk, O. (2017). Structural, electronic, and electrochemical analyses of sputter-coated Pt and Pt–Co/GCE electrodes with ultra-low metal loadings for PEM fuel cell applications. Journal of Applied Electrochemistry, 47(2), 139-155.

Dursun, B., Sar, T., Ata, A., Morcrette, M., Akbas, M. Y.,Demir-Cakan, R. (2016). Pyrolyzed bacterial cellulose-supported SnO2 nanocomposites as high-capacity anode materials for sodium-ion batteries. Cellulose, 23(4), 2597-2607.

Chumakov, Y., Aksakal, F., Dimoglo, A., Ata, A.,Palomares-Sánchez, S. A. (2016). First-Principles Study of Thermoelectric Properties of Covalent Organic Frameworks. Journal of Electronic Materials, 45(7), 3445-3452.

Akel, M., Ünügür Çelik, S., Bozkurt, A.,;Ata, A. (2016). Nano hexagonal boron nitride–Nafion composite membranes for proton exchange membrane fuel cells. Polymer Composites, 37(2), 422-428.

Şener, T., Demirci, U. B., Gül, Ö. F.,Ata, A. (2015). Pd–MnO2–Fe2O3/C as electrocatalyst for the formic acid electrooxidation. International Journal of Hydrogen Energy, 40(21), 6920-6926.

Uzunoglu, A., Dundar, F.,Ata, A. (2015). Modification of vulcan XC-72 for enhanced durability of PEMFC catalyst layer. International Journal of Renewable Energy Research (IJRER), 5(1), 111-120.

Sen, U., Usta, H., Acar, O., Citir, M., Canlier, A., Bozkurt, A.,Ata, A. (2015). Enhancement of Anhydrous Proton Conductivity of Poly (vinylphosphonic acid)–Poly (2, 5‐benzimidazole) Membranes via In Situ Polymerization. Macromolecular Chemistry and Physics, 216(1), 106-112.

Yildiz, Ö., Soydan, A. M., Ata, A., Ipcizade, E. F., Akin, D.,Uçak, Ö. (2014). Structural Analysis of Ce Doped La 1-x SrxCo 1-y FeyO 3-δ Nanopowders Synthesized by Glycine-Nitrate Gel Combustion. Acta Physica Polonica, A., 125(2).

Sen, U., Acar, O., Celik, S. U., Bozkurt, A., Ata, A., Tokumasu, T., Miyamoto, A. (2013). Proton-conducting blend membranes of Nafion/poly (vinylphosphonic acid) for proton exchange membrane fuel cells. Journal of Polymer Research, 20(9), 217.

Yildiz, Ö., Soydan, A. M., Ata, A., Tunaboylu, B., Akin, D.,Ipcizade, E. F. (2013). Properties of Ceria Based Novel Anode Nanopowders Synthesized by Glycine–Nitrate Process. Acta Physica Polonica, A., 123(2).

Dundar, F., Uzunoglu, A., Ata, A., Wynne, K. J. (2012). Durability of carbon–silica supported catalysts for proton exchange membrane fuel cells. journal of Power Sources, 202, 184-189.

Pinchuk, O. A., Dundar, F., Ata, A., Wynne, K. J. (2012). Improved thermal stability, properties, and electrocatalytic activity of sol-gel silica modified carbon supported Pt catalysts. international journal of hydrogen energy, 37(3), 2111-2120.

Aydın, M., Esat, B., Kılıç, Ç., Köse, M. E., Ata, A., Yılmaz, F. (2011). A polythiophene derivative bearing TEMPO as a cathode material for rechargeable batteries. European Polymer Journal, 47(12), 2283-2294.

Boroglu, M. S., Cavus, S., Boz, I.,Ata, A. (2011). Synthesis and characterization of poly (vinyl alcohol) proton exchange membranes modified with 4, 4-diaminodiphenylether-2, 2-disulfonic acid. Express Polymer Letters, 5(5).

Unal Sen, Oktay Acar, Ayhan Bozkurt, ;Ali Ata, Proton conducting polymer blends from poly(2,5-benzimidazole) and poly(2-acrylamido-2-methyl-1-propanesulfonic acid), Journal of Applied Polymer Science, Volume 120, Issue 2, Pages 1193-1198 (2011)

Hamide Aydın, Mehmet Senel, Hamit Erdemi, Abdulhadi Baykal, Metin Tulu,Ali Ata, Ayhan Bozkurt, Inorganic–organic polymer electrolytes based on poly(vinyl alcohol) and borane/poly(ethylene glycol) monomethyl ether for Li-ion batteries, Journal of Power Sources, 196 1425-1432, (2011)

Unal Sen, Ayhan Bozkurt, Ali Ata,
Nafion/Poly(1-vinyl-1,2,4-triazole) Blends as Proton Conducting Membranes for Polymer Electrolyte Membrane Fuel Cells, Journal of Power Sources 195, 7720–7726, (2010);

Oktay Acar, Unal Sen, Ayhan Bozkurt, Ali Ata, Blend membranes from poly(2,5-benzimidazole) and
poly(styrene sulfonic acid) as proton-conducting polymer electrolytes for fuel cells,
Journal of Materials Science 160;45,Issue 4, 993-998 (2010)

Pinchuk, O.A., S.R. Aubuchon, C. Marks, R. Dominey, F.
Dundar, O.F. Deniz, A. Ata, and K.J.
Wynne, Thermally Pretreated 46%Pt/Vulcan XC72: Characterisation by TGA/DSC/TEM and Cyclic Voltammetry, Fuel Cells, 9(5): p. 554-561 (2009)

Oktay Acar,Unal Sen, Ayhan Bozkurt, Ali Ata, Proton conducting membranes based on
Poly(2,5-benzimidazole) (ABPBI)–Poly(vinylphosphonic acid) blends for fuel
cells International Journal ofHydrogen Energy, 34, Issue 6, 2724-2730 (2009)

Ali Ata, The Effect of Humidity on the Adhesion Behavior
of AC Anodised Aluminium, Journal ofAdhesion Science and Technology, 22, 733-744 (2008)

A.Polat,M.Usta, M. Makaracı, A. Ata, Z. Taş,
Properties of Alumina Coating Formed by Microarc Oxidation Technique on 6061
Aluminum Alloy, Practical Metallography 45, 594-609 (2008)

Ünal Şen, Sevim Ünügür , Çelik, Ali Ata, Ayhan Bozkurt, Anhydrous
Proton Conducting Membranes for PEM Fuel Cells Based on Nafion/Azole Composites,
International Journal of Hydrogen Energy 33, 2808-2815 (2008)

F. Ay, A. Ata, H. Dohle, T. Şener, H.Gorgun, Current Density Measurements in
Direct Methanol Fuel Cells, Journal of Power
Sources 167, 391-397 (2007)

F. Dundar, A.Smirnova, X. Dong, A. Ata, and N. Sammes, Rotating Disk Electrode Study of Supported and Unsupported Catalysts for PEMFC Application, Journal of Fuel Cell Science and Technology v.3 issue 4, 428-433 (2006).

B.Tunaboylu, C.S Ozkan; A. Ata, K. Ring, S.Esener; Phase transformation and paired-plate precipitate formation in Pb0.91La0.09Zr0.65Ti0.35O3 films on sapphire substrates160;

Materials Science in Semiconductor Processing 160;v.5 199-206 (2003).

Y.I. Rabinovich, J.J. Adler, M.S. Esayanur, A. Ata, R.K. Singh, B.M. Moudgil “Capillary Forces Between Surfaces with Nonoscale Roughness”

Advances in Colloid and Interface Science v.96213-230 (2002).

Ata, A., Rabinovich, Y.I. and Singh, R.K. “Role of Surface Roughness in Capillary Adhesion”

Journal of Adhesion Science and Technology v.16 n.4 337-346 (2002).

Tunaboylu, B., Ring, K., Esener, S., Ozkan, C. and Ata, A. “Precipitate
Splitting in PLZT Films” Journal of Materials Research v.16, no.10, 2763-2766 (2001).

Rabinovich, Y.I., Adler, J.J., Ata, A., Singh, R.K. and Moudgil, B.M. “Adhesion Between Nanoscale Rough SurfacesI. Role of Asperity Geometry”

Journal of Colloid & Interface Science v. 232, 10-16 (2000).

Rabinovich, Y.I., Adler, J.J., Ata, A., Singh, R.K. and Moudgil, B.M. “Adhesion Between Nanoscale
Rough Surfaces II. Measurement and Comparison with Theory”

Journal of Colloid Interface Science v. 232, 17-24 (2000).

Kumar, D., Ata, A., Mahajan, U., and Singh, R.K.; “Role of Line Beam on the
Removal of Particulate Contaminations from Solid Surfaces

Journal of Electronic Materials v.27, n.10, 1104-1106 (1998).

Ata, A., Hoghooghi, B. McKittrick, J., Helsel, E. and Loam, J. “The Effect of Lithium and
Barium Concentrations on the Zeolite Glass Phase Transformations”

Journal of MaterialsSynthesis Processing, v.5, n.3, p 217-225 (1997).

Singh, R.K., Ata, A., Fitz-Gerald, J. and Hendrickson W. “Dry coating method for surface modification
of particulates”

Surface Engineering, v.13, no.4, 295-298 (1997).

Singh, R.K., Ata, A., Fitz-Gerald, J., Rabinovich, Y.I.  Hendrickson, W. “Dry Coating Method Using Magnetically Assisted Impaction in a Randomly Turbulent Fluidized Bed”
Kona, v. 15, 121-131 (1997).

Khoee, S.M.M., Ata, A., Geçkinli, A.E. and Bozkurt,
“VC  NbC coating on DIN
115CrV3 Steel in Molten Borax Bath” Materials
Science Forum, v.163, 627-632(1994).

PROCEEDINGS AND BOOK CHAPTERS

Ata, A., Rabinovich, Y.I., Singh, R.K. and
Hendrickson W. “Magnetically assisted impaction coating process to synthesize
engineered particulates with controlled surface characteristics” Surface-Controlled
Nanoscale Materials for High-Added-Value Applications. Symposium. Mater. Res.
Soc. v.501, 333-338. Warrendale, PA, USA., 1998.

Atıf Sayısı:58

Ata, A., Fitz-Gerald, J. and Singh R.K. “Control of particle adhesion to surfaces by depositing nanometric interfacial layers” Surface-Controlled Nanoscale Materials for High-Added-Value Applications. Symposium. Materials Research Society v.501381-385. Warrendale, PA,
USA., 1998.

Khoee, S.M. and Ata, A. “Non-oxide thin Ceramic Layer Formation in Molten borax Bath”
Int. Ceramic Congress Proceedings 508-515, Istanbul, 1992

Ali Ata and Rajiv K. Singh “Synthesis of composite particles by a dry coating technique” Particles on Surfaces: Detection, Adhesion and Removal Ed. K.L. Mittal, VSP Publications, 1999.

Singh RK, Ata A, FitzGerald J, Hendrickson ;‘Dry coating method for surface modification of particulates’, SURFACE MODIFICATION TECHNOLOGIES X 909-917 199710th International Conference on Surface Modification Technologies SINGAPORE, SINGAPORE, SEP 02-04, 1996

Toplam Atıf :Sayısı: 1245

Kişinin DersWeb siteleri

• MBM 533 Yüzey Bilimi
• MBM 534 Elektronik ve Fotonik Malzemeler ve Cihazlar

Doktora Tezleri :

*Konusu: Yakıt Hucrelerinde Karbon Destek Korozyonu

Hazırlayan : Furkan DUNDAR

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2007

Bitiş Tarihi :2010

*Konusu : PEM Tipi Yakıt Hucrelerinde Yuksek Sıcaklığa Dayanıklı Membran Geliştirme

Hazırlayan : Unal ŞEN

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2006

Bitiş Tarihi :2010

*Konusu: Yakıt Hucrelerinde Bipolar Tabakalar

Hazırlayan: Fatih AY

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2007

Bitiş Tarihi :2010

Konusu :100 Watt güç üreten mikro boru tipi katı oksit yakıt hücresi sisteminin
üretimi ve geliştirilmesi

Hazırlayan : Ali Murat Soydan

Başlama Tarihi : 2015

Bitiş Tarihi : 2017

Yüksek Lisans Tezleri :

*Konusu: Guneş Enerjisi Kaynaklı Cift Etkili Absorpsiyonlu Chiller ile Soğutma İşleminin Verimliliğinin Olculmesi

Hazırlayan: Nusret OĞUZ

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2008

Bitiş Tarihi : 2009

*Konusu: Katı Oksit Yakıt Hucreleri İçin Yeni Malzemelerin Sentezi ve Hücre SisteminGeliştirilmesi

Hazırlayan: Ali Murat SOYDAN

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2007

Bitiş Tarihi :2009

*Konusu : Şehirici Ulaşımda Elektrikli Dizel Hibrit Otobus Geliştirilmesi

Hazırlayan: Sedat TAŞ

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2007

Bitiş Tarihi : 2009

*Konusu: Yakıt Hucrelerinde Kompozit Polimer Membran Geliştirme

Hazırlayan: Oktay ACAR

Tez Danışmanı : Prof.Dr. Ali ATA

Başlama Tarihi : 2008

Bitiş Tarihi : 2009

Konusu :Termo plastik ekstrüzyon yöntemi kullanılarak mikroboru tipi katı oksit
yakıt hücrelerinin üretimi ve performansının incelenmesi

Hazırlayan:DURĞUN ABDULLATİF

Tez Danışmanı : Prof.Dr. Ali Ata

Başlama Tarihi : 2018

Bitiş Tarihi : 2020

• Doktora: 1998 Ph.D. in Materials Sci. & Eng.University of Florida, Gainesville, Florida USA.
• Yüksek lisans: 1995 Malzeme Bilimi Yüksek Lisans,İstanbul Teknik Universitesi
• Lisans: 1989 B.S. in Metallurgical Engineering Middle East Technical University

SELECTED PROJECTS

YEŞİL ULAŞIMDA KULLANILACAK Lİ-POLİMER BATARYALARDA VERİMLİLİK ARTTIRMA AMAÇLI ISIL YÖNETİM, Proje Yürütücüsü, 2012-2014

HİBRİT HİDROJENLİ OTOBÜSÜN DİZAYNI, Proje Yürütücüsü, 2010-2012

100 WATT GÜÇ ÜRETEN MİKRO BORU TİPİ KATI OKSİT YAKIT HÜCRESİ SİSTEMİNİN ÜRETİMİ, Proje Yürütücüsü, 2011-2013

Fuel Cell Stack Assembly and Diagnostics FP7-IRG Grant No:PIRG01-GA-2007-201711 Proje Yürütücüsü 2008.

Elektrokimyasal Enerji Çevrimi İçin İnce Film Elektrokatalizör Üretimi Proje Yürütücüsü, MAG107M003, 2007.

Sputtered thin films as electrocatalysts for electrochemical energy converters Araştırmacı Türk-Bulgar Ortak Araştırma Projesi TÜBİTAK 2007.

PEM Tipi Yakıt Hücrelerinde Kullanılan Platin Miktarının Azaltılması İçin Kinetik Özelliklerin Tayini, Proje Yürütücüsü, MAG 106M033 TUBITAK, 2006-2009.

Doğrudan Hidrokarbon Yakıt Kullanan ve Düşük Sıcaklıkta Çalışan Katı Oksit Yakıt Hücresi için Yeni Anot Malzemelerinin Geliştirilmesi Tubitak MAG, 2007-2009.

Nanotechnology Research Center DPT Projesi, Project Director, 2002.
Alumina Esaslı Seramik Fiberlerin Sol-Jel Metoduyla Üretimi, TÜBİTAK ,, MİSAG 10, 1993.