Dr. Öğr. Üyesi Recep ÖNLER
Makine Mühendisliği

Recep ÖNLER
Telefon
(262) 605 27 79
E-Posta
ronlergtu.edu.tr
Ofis
H2 Blok, Z21
Çalışma alanları
Eklemeli İmalat, İleri İmalat Yöntemleri, Mikro-Nano Üretim, Hassas Mühendislik, Ürün ve Proses Geliştirme, Yüzey Mühendisliği, Metroloji

Journal Articles

  • R. Onler, A. S. Koca, B. Kırım and E. Soylemez, 2021. Multi-objective Optimization of Binder Jet Additive Manufacturing of Co-Cr-Mo using Machine Learning. The International Journal of Advanced Manufacturing Technology.
  • Onler, R., Atre, S.V., Ozdoganlar, O. B., 2019. Forces in Green Micromachining of Ceramics: an Experimental Investigation on Micromachining of Aluminum Nitride. ASME Journal of Micro and Nano-Manufacturing.
  • Nahata, S., Onler, R. and Ozdoganlar, O. B., 2019. Radial Throw in Micromilling: A Simulation-based Study to Analyze the Effects on Surface Quality and Uncut Chip Thickness. ASME Journal of Micro and Nano-Manufacturing.
  • Onler, R., Korkmaz, E., Kate, K., Chinn, R. E., Atre, S. V. and Ozdoganlar, O. B., 2019. Green micromachining of ceramics using tungsten carbide micro-endmills. Journal of Materials Processing Technology.
  • Nahata, S., Onler, R., Shekhar, S., Korkmaz, E. and Ozdoganlar, O. B., 2018. Radial throw in micromachining: Measurement and analysis. Precision Engineering.
  • Promoppatum, P., Onler, R. and Yao, S. C., 2017. Numerical and experimental investigations of micro and macro characteristics of direct metal laser sintered Ti-6Al-4V products. Journal of
    Materials Processing Technology.
  • Dougherty, P.S., Srivastava, G., Onler, R., Ozdoganlar, O. B. and Higgs III, C. F., 2015. Lubrication enhancement for UHMWPE sliding contacts through surface texturing. Tribology Transactions.

Conference Proceedings

  • N. Sarıaltın, R. Önler, “Investigation of Tribological Performance of Brake Pads Containing Various Solid Lubricant Combinations” presented at V. International Ege Composite Materials Symposium KOMPEGE 2021, November 2021
  • R. Onler, A. S. Koca, B. Kırım and E. Soylemez, “Predicting Binder Jet Additive Manufacturing Part Quality Using Support Vector Machine And K-Nearest Neighbors,” presented at Additive Manufacturing Conference AMCTURKEY, September 2021.
  • N. Sarıaltın, R. Önler, “An Experimental Investigation of the Effect of Various Solid Lubricants on the Tribological Performance of Brake Pads” presented at 10th International Automotive Technologies Congress OTEKON2020, September 2021
  • R. Önler, S. B. Akturk, E. Topac, E. Ozdemir, A. S. Oktem, and O. B. Saban, “Enhancing Corrosion Resistance of Steel Substrates with Reduced Graphene Oxide Reinforced Polymer Composite Coatings,” presented at the Materials Science & Technology MST2020, 2020.
  • A. S. Koca, B. Kırım, R. Onler, and E. Soylemez, “Multi objective Optimization of Binder Jetting Process Parameters for the Co Cr Mo Alloy,” presented at the Materials Science & Technology MST2020 , 2020.
  • Shekhar, S., Ozutemiz, KB,, Onler, R., and Ozdoganlar, O. B., Estimating Uncertainty in Polymer Micro-Milling Force Models Using Bayesian Inference; 3rd WCMNM, Raleigh, USA, September 2019.
  • Onler, R., and Ozdoganlar, O. B., Forces in Green Micromachining of Aluminum Nitride Ceramics, 2nd WCMNM, Portoroz, Slovenia, September 2018.
  • Nahata, S., Onler, R., and Ozdoganlar, O. B., Radial Throw in Micromilling: The Effects on Surface Location Error, Sidewall Surface Roughness and Uncut Chip Thickness, 2nd WCMNM, Portoroz, Slovenia, September 2018.
  • Nahata, S., Onler, R., Korkmaz, E. and Ozdoganlar, O. B., Radial Throw at the Cutting Edges of Micro-Tools When Using Ultra-High-Speed Micromachining Spindles, NAMRC/SME 46, College Station, TX, Jun 2018.
  • Korkmaz, E., Onler, R. and Ozdoganlar, O. B., Micromilling of Poly (methyl methacrylate, PMMA) Using Single-Crystal Diamond Tools, Transactions of the NAMRC/SME 45, Los Angeles, CA, Jun 2017.
  • Chinn, R. E., Atre, S. V., Kate, K. H., Onler, R. and Ozdoganlar, O.B., 2016. Microstructural Development of Green Micro-Machined, Injection-Molded Silicon Carbide, Microscopy and Microanalysis,  July 2016.
  • Onler, R., Kate, K. H., Atre, S. V. and Ozdoganlar, O.B., 2016. Effects of Nanoparticle Addition on Green State Micromachinability of Powder Injection Molded AlN.11th ICOMM, Irvine, CA, USA, March 2016.
  • Nahata, S., Onler, R., and Ozdoganlar, O. B., Experimental Investigation of Radial Throw in miniature spindles used for micromachining, 4m/ICOMM, Milan, Italy, March 2015
  • Chinn, R. E., Kate, K. H., Atre, S. V., Onler, R. and Ozdoganlar, O.B., Green Micro-machining and Sintering of Injection Molded Silicon Carbide. PowderMet 2015, San Diego, United States, May 2015.
  • Kate, K., Guo, A., Onbattuvelli, V. P., Chinn, R., Onler, R., Ozdoganlar, B. and Atre, S.V., Micromanufacturing of ceramics by combining powder injection molding and green micromachining. PowderMet 2014, Orlando, United States, May 2015. 
  • Pudjoprawoto, R., Onler, R., Dougherty, P., Ozdoganlar, O. B. and Higgs III, C. F., An Investigation of the Tribological Performance of Textured Solid Lubricant Reservoir Tribosystems. 2013 STLE 68th Annual Meeting & Exhibition, Detroit, United States, May 2013.
  • Onler, R., Gozen, B.A. and Ozdoganlar, O.B., Elastomer Molding of Micro- and Nano-Scale Features. 8th ICOMM, Victoria, BC, Canada, March 2013.
  • Dougherty, P. S. M. and Srivastava, G., Onler, R. and Ozdoganlar, O. B. and Higgs III, C.F.Surface Texturing in Artificial Hip Joints for Friction and Wear Control I Experiments Fifth World Tribol. Congr. WTC 2013, Torino, Italy, September 2013.

  • MUHAMMET FURKAN ÇOŞKUN, A Numerical Investigation of Powder Spreading in Additive Manufacturing, GTÜ, 2023
  • TAHA AKBULAT Grafen takviyeli kompozit kaplamaların fiziksel ve kimyasal özelliklerinin incelenmesi , GTÜ, 2022
  • NESLİHAN DİKBAŞ SARIALTIN Katı yağlayıcıların sürtünme malzemelerinin tribolojik özelliklerine etkisi , GTÜ, 2022
  • BATUHAN TURGUT Comparison of solid and metal cored wires in wire arc additive manufacturing of low-alloyed steel parts, GTÜ, 2022
  • AHMET SELİM KOCA Bağlayıcı püskürtme eklemeli imalat parametrelerinin CoCr-Mo (F75) alaşım için çok amaçlı optimizasyonu, İTÜ, 2021 ( Eş Danışman)
  • Doktora: Carnegie Mellon University
  • Yüksek lisans: Carnegie Mellon University
  • Lisans: Afyon Kocatepe University
Size daha iyi hizmet verebilmek için sitemizde çerezlere yer veriyoruz. Çerezlerle ilgili detaylı bilgi için çerez politikamıza göz atabilirsiniz. Detaylı bilgi için tıklayınız. Kabul ediyorum