A-Z İndeks

Prof. Dr. Bülent AKBAŞ
İnşaat Mühendisliği bölümü

Bülent AKBAŞ
Telefon
(262) 605 3308
E-Posta
akbasbgtu.edu.tr
Ofis
, İnşaat Mühendisliği Bölümü Z:30
Çalışma alanları
Deprem Mühendisliği, Performansa Dayalı Tasarım, Yapıların Sismik Değerlendirmesi, Çelik Yapılar,Endüstri Tesisleri,Tanklar,Silolar,Tarihi Yapılar, Yapısal Sağlık İzlemesi İzlemesi, Zemin-Yapı Etk.,

Journal Article

  1. Dogru, S., Aksar, B., Akbas, B., Shen, J., “Parametric Study on Energy Demands for Special Steel Concentrically Braced Frames,” Steel and Composite Structures, an International Journal, Vol. 24, No. 2, June, 2017.

  2. Erdogan, H., Doran, B., Seckin, A., Akbas, B., Celikoglu, Y., Bostan, T., “Seismic Performance of Retrofit Evaluation of an Existing Pile-Wharf Structure,” Journal of Performance of Constructed Facilities, Vol. 31, No. 6, 2017.

  3. Ozdemir, M.A., Kaya, E.S., Aksar, B., Seker, B.S., Cakir, F., Uckan, E., Akbas, B., “Seismic Vulnerability of Masonry Jack Arch Slabs,” Engineering Failure Analysis, Vol. 77, pp. 146-159, 2017.

  4. Aksar, B., Dogru,S., Akbas, B., “Çelik Moment Çerçevelerde Kuvvetli Deprem Yer Hareketi Altında Arttırılmış Deprem Etkileri,”Journal of the Faculty of Engineering and Architecture of Gazi University, Vol. 33, No. 2, 146-159, 2018.

  5. Shen J., Seker O.,Akbas B., Seker P.T., Momenzadeh S.,Faytarouni M., "Seismic Performance of Concentrically Braced Frames with and without Brace Buckling" Engineering Structures, Vol. 141, 461-481, 2017.

  6. Aksar, B., Kaya,E.S., Cakir, F., Akbas, B., “Effect of Torsion in Concentrically Braced Frames due to Variation in Strength -Merkezi Çaprazli Çerçevelerde Dayanım Farklılığı Sonucu Oluşan Burulma Etkileri,” Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Vol. 33, No. 1, 13-30, 2018.

  7. Doran, B., Shen, J., Wen, R.,Akbas, B, Bozer, A., “Neural Network Modeling of Seismic Response of Non-Ductile Braced Multi-Storey Buildings,” Proceedings of the Institution of Civil Engineers, Structures and Buildings, Vol. 170, No. 3, 159-167, 2017.

  8. Kaya, E.S.,Uckan, E., O’Rourke, M.J., Karamanos, S.A.,Akbas, B., Cakir, F., Cheng, Y.,“Failure Analysis of a Welded Steel Pipe at Kullar Fault Crossing,” Engineering Failure Analyses, Vol. 71, pp. 43-62, 2017.

  9. Phan, H.N., Paolacci, F., Corritore, D.,Akbas, B., Uckan, E., Shen, J., “Seismic Vulnerability of Liquefied Gas Tanks using Concave Sliding Bearings,” Bulletin of Earthquake Engineering, Vol. 14, pp. 3283-3299, 2016.

  10. Kaya, E.S., Uckan, E., Shen, J., Cakir, F., Akbas, B., “A 3D Nonlinear Numerical Model for
    the Response of Buried Steel Pipes at Strike-Slip Fault Crossings,” Journal Gradevinar (in print), 2016.

  11. Uckan, E.,Akbas, B., Kaya, E.S., Cakir, F., Ipek, C., Makaraci, M., Ataoglu, S., “Design Issues of Buried Pipelines at Permanent Ground Deformation Zones,” Disaster Science and Engineering, Vol. 2, No. 2, pp. 53-58, 2016.

  12. Aksar, B., Dogru, S.,Akbas, B., Shen, J., Seker, O., Wen, R., “Amplified Seismic Loads in Steel Moment Frames,” Applied Mechanics and Materials, Vol. 847, pp. 222-232, 2016.

  13. Dogru, S., Aksar, B.,Akbas, B., Shen, J., Seker, O., Wen, R., “Seismic Energy Demands in Steel Moment Frames,” Applied Mechanics and Materials, Vol. 847, pp. 210-221, 2016.

  14. Akbas, B.,Aksar, B., Doran, B., and Alacalı S., “Hysteretic Energy to Energy Input Ratio
    Spectrum in Nonlinear Systems,” Journal of Science and Engineering, Vol. 18,No. 2, Issue 53, 2016.

  15. Shen, J., Seker, O., Sutchiewcharn, N., Akbas, B., “Cyclic Behavior of Buckling-Controlled Braces,” Journal of Constructional Steel Research, Vol. 121, pp. 110-125, 2016.

  16. Senol, E., Kose, İ., Doran, B., Mezrea, P.E.,Akbas, B., “Ductility Enhancement in Reinforced Concrete Structure with Buckling-Restrained Braced Frames,” Applied Mechanics and Materials, Vol. 847, pp. 281-289, 2016.

  17. Akbas, B., Doran,B., Alacali, S.N., Aksar, B., “Estimating Stiffness Modification Factor for the Coupling Beam of Coupled Shear Walls Using a Neural Network Model,” Karaelmas Science and Engineering Journal, 2016.

  18. Cakir, F., Uckan, E., Shen, J., Seker, S., and Akbas, B., “Seismic Damage Evaluation of Historical Structures During Van Earthquake, October 23, 2011,” Engineering Failure Analysis, Vol. 58, pp. 249-266, 2015.

  19. Cakir,F., Uckan, E., Shen, J., Seker, S., and Akbas,B., “Seismic Performance Evaluation of Slender Masonry Towers: A Case Study,” The Structural Design of Tall and Special Buildings (in print), 2015.

  20. Shen,J., Wen, R., Akbaş, B., Seker, O., and Uckan, E., “Near-Collapse Behavior of Steel Buildings with Non-Ductile Concentrically Braced Frames,” Journal of Constructional Steel Research, Vol. 113, pp. 101-114, 2015.

  21. Uckan,E., Akbas, B., Shen, J., Wen, R., Paolacci, F., and O’Rourke, M., “A Simplified Analysis Model for Determining the Seismic Response of Buried Steel Pipes at Strike-Slip Fault Crossings,” Soil Dynamics and Earthquake Engineering,Vol. 75, pp. 55-65, 2015.

  22. Wen,R., Seker, O., Akbas, B., Shen, J., “Comparative Seismic Designs of Special Concentrically Braced Frame using AISC 341-05 and AISC 341-10,” ASCE's Practice Periodical on Structural Design and Construction (in print), 2015.

  23. Shen, J., Akbas, B., Seker, O.,Doran, B.,Wen, R., Uckan,E.,"Seismic Axial Loads in Steel Moment Resisting Frames," International Journal of Steel Structures , DOI 10.1007/s13296-014-, 2015.
  24. Shen, J., Wen, R., Akbas, B., "Mechanisms in Two-Story X-Braced Frames," Journal of Constructional Steel Research, Vol. 106, pp.258-277, 2015.
  25. Doran, B., Shen, J.,Akbas, B., "Seismic Evaluation of Existing Wharf Structures: Case Study," Earthquake Spectra, Vol. 31, No. 2, pp. 1-18, May 2015.
  26. Uckan, E.,Akbas, B., Shen, J., Wen, R., Turandar, K., Erdik, M., "Seismic Performance of Elevated Steel Silos during Van Earthquake, October 23, 2011," Natural Hazards,Vol. 75, pp. 265-287, 2015.
  27. Wen, R. Shen, J., Akbas, B., Doran, B., Uckan, E., “Seismic Demand on Brace-Intersected Beams in Two-Story X-Braced Frames,” Engineering Structures, Vol. 76, pp. 295-312, 2014.
  28. Doran, B., Erdolen, A.,Akbas, B.,Kutug, Z., Koksal H.O., "Uncertainty Definition on the Constitutive Models for RC Columns Wrapped with FRP," The Arabian Journal for Science and Engineering,DOI: 10.1007/s13369-014-1316-z, 2014.
  29. Akbas, B., Doran, B., Sabol, T. A., Seker, O., Toru, P., Shen, J., "Effect of Various Span Lengths on Seismic Demand on Column Splices in Steel Moment Frames," Engineering Structures, Vol. 70, pp. 94-105, 2014.
  30. Wen, R., Akbas, B.,Sutchiewcharn, N, and Shen, J., “Inelastic Behavior of Steel Shear Tab Connections," The Structural Design of Tall and Special Buildings, Vol.23, No.12, pp. 929-946, 2014.
  31. Seker, O., Akbas, B.,Shen, J., Ozturk, A.Z., “Evaluation of Deflection Amplification Factor in Steel Moment-Resisting Frames,” The Structural Design of Tall and Special Buildings, Vol. 23, No. 12, pp. 897-928, 2014.
  32. Wen, R.,Akbas, B., and Shen, J., “Practical Moment-Rotation Relations of Steel Shear Tab Connections," Journal of Constructional Steel Research, Vol. 88, pp.296-308, 2013.
  33. Sayim, I.,Akbas, B., Doran, B., “Monitoring Roof Displacements with GPS in a Long Period Structure (Uzun Periyotlu bir Yapıda Çatı Yer Değiştirmelerinin GPS ile İzlenmesi)” Technical Journal, Vol. 23, No.3, pp. 6017-6036, 2012.
  34. Akbas, B.,Sutchiewcharn, N., Cai, W., Wen, R., Shen, J., “Comparative Study of Special
    and Ordinary Braced Frames,” The Structural Design of Tall and Special Buildings, DOI: 10.1002/tal.750, 2012.
  35. Yuzer, N.,Akbas, B., Kizilkanat, A., “Predicting the high temperature effect on mortar compressive strength by neural network,” Computers and Concrete, Vol. 8, No. 5, pp. 491-510, 2011.
  36. Akbas, B., Shen, J., Sabol, TA, “Estimation of Seismic-Induced Demands on Column Splices with a Neural Network Model,” Applied Soft Computing, Vol. 11, Issue 8, pp.4820-4829, 2011.
  37. Alacalı, SN, Akbas, B., Doran, B., “Prediction of Lateral Confinement Coefficient in Resinforced Concrete Columns Using Neural Network Simulataion,” Applied Soft Computing, Vol. 11, pp.2645-2655, 2011.
  38. Shen, J., Sabol, TA, Akbas, B. and Sutchiewcharn, N., “Seismic Demand on Column Splices in Steel Moment Frames,” Engineering Journal, 4th Quarter, pp. 223-240, 2010.
  39. Akin, D. and Akbas, B., "A Neural Network (NN) Model to Predict Intersection Crashes based upon Driver, Vehicle and Roadway Surface Characteristics," SRE, Vo. 5(19), pp. 2837-2847, 2010.

  40. Akbas, B., Tugsal, UM, Kara, FI, ”An EvaluatIon of Energy Response and CumulatIve PlastIc RotatIon Demand In Steel Moment Resisting Frames Through Dynamic/Static Pushover Analyses,The Structural Design of Tall and Special Buildings, Vol.18, pp.405-426, 2009.
  41. Akbas, B., Nadar, M., and Shen, J., “A Methodology to Estimate Earthquake Induced Worst Failure Probability of Inelastic Systems,” Structural Engineering and Mechanics Vol.29, No.2, pp. 187-202, 2008.
  42. Akbas, B., Kara, F.I.,.ve Tuğsal, U.M., “Comparison of Nonlinear Time History and Pushover Analyses for a Given Ductility in Steel Moment Resisting Frames” Technical Journal, Vol. 18, No. 3, 4177-4196, July 2007.
  43. Akbas, B., “A Neural Network Approach to Assess the Hysteretic Energy Demand In Steel Moment Resistant Frames,” Structural Engineering and Mechanics, Vol.23,No.2, pp.177-193, 2006.
  44. Akbas, B., Shen, J., and Temiz, H.,”Identifying the Hysteretic Energy Demand and Distribution In Regular Steel Frames,” Steel and ComposIte Structures, Vol.6, No.6, pp. 479-491, 2006.
  45. Akbas, B. ve Shen, J., “Çift Korniyerli Kesme KuvvetI Aktaran BIrleşImlerIn Doğrusal Olmayan DavranIşInIn ModellenmesI,” SIgma MuhendIslIk ve Fen Bilimleri Dergisi, Sayı 2, pp. 83-101, 2006.
  46. Akbas, B. and Shen, J., “Depreme Dayanıklı Yapı Tasarımı ve Enerji Kavramı,” Teknik Dergi, Cilt 14, No. 2, pp. 2877-2901, Nisan 2003.
  47. Akbas, B. and Shen, J., “Seismic BehavIor of Steel Buildings wIth Combined Rigid and Semi-Rigid Frames,” Turkish Journal of Engineering and Environmental Sciences, Vol.27, No.4, pp.253-264, 2003.
  48. Akbas, B., Shen, J., and Hao, H., “Energy Approach In Performance-Based Seismic Design of Steel Moment Resisting Frames for Basic Safety Objective,” The Structural Design of Tall Buildings, Vol. 10, pp. 193-217, 2001.
  49. Shen, J. and Akbas, B., “Seismic Energy Demand In Steel Moment Frames,” Journal of Earthquake Engineering, Vol. 3, No. 4, pp. 519-559, October 1999.

Conference Proceedings

  1. Zorlu, M. Polat,G., Akbaş, B., “Yeni Türk Deprem Yönetmeliği (Taslak-2016)'ne Göre Betonarme ve Çelik Yapıların Tasarımı” Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu), 17-18 May 2017.

  2. Çetindemir, O.,Akbaş, B., “Betonarme Binalar Üzerinde Dayanım Fazlalığı Katsayısı Hakkında Bir Değerlendirme” Gebze Technical University, Graduate School of Natural and
    Applied Sciences, Graduate Studies Symposium (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu), 17-18 May 2017.

  3. Yenitürk, Ö. Akbaş,B., “Merkezi Çaprazlı Çelik Çerçevelerde Artırılmış Deprem Etkileri” Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate
    Studies Symposium (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü,Lisansüstü Araştırmalar Sempozyumu), 17-18 May 2017.

  4. Kaya, E.S.,Uckan, E., Cakir, F., Siyahi, B., Akbas, B., “Analysis and Design of Buried Steel Pipes at Fault Crossings,” 12th International Congress on Advances inCivil Engineering ACE2016, Bogazici University, Istanbul, Turkey, September21-23, 2016.
  5. Cakir, F., Uckan, E., Akbas, B., Siyahi, B., Kanli, N., Cakit, A. R., Kaskan, S. G.,“Performance-Based Evaluation of Hydrocarbon Steel Pipes under Internal Pressure,” International Congress on Advanced Earthquake Resistant Structures(AERS2016), Ataturk Congress and Cultural Center, October 24-28, 2016.

  6. Seckin, H., Atalay, H.M., Erdogan, H., Doran, B., Akbas, B., “Strain-Based Seismic Performance Evaluation of Prefabricated Structures,” International Congress on Advanced Earthquake Resistant Structures (AERS2016), Ataturk Congress and Cultural Center, October 24-28, 2016.

  7. Dogru, S., Aksar, B., Akbas, B., Shen, J., Doran, B., “Seismic Energy Demands of Inverted
    V-Braced Frames,” International Congress on Advanced Earthquake Resistant Structures (AERS2016), Ataturk Congress and Cultural Center, October 24-28,2016.

  8. Akbas, B., “Afet Sonrası Arama ve Destek Çalışmalarının Planlanması,” III. Afet Lojistiği
    Konferansı, April 14, 2016, TSE Cayirova Campus, Kocaeli.

  9. Ayaz, S., Cakir,F., Akbas, B., “Performance Based Approaches in Seismic Evaluation of
    Historical Structures (Tarihi Yapıların Deprem Performanslarının Performans Esaslı Yaklaşımlarla Değerlendirilmesi),” Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  10. Comlek, Rasit,Akbas, B., “Energy Based Design of Tall Buildings (Yüksek Yapılarda Enerji
    Esaslı Tasarım),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  11. Sonmez Aslan,Seda, Akbas, B., “Smart Phone and Tablet Applications on Structual Analysis (Akıllı Telefonlarda ve Tabletlerde Bulunan Statik Hesaplara Dair Uygulamalar),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  12. Turk, Huseyin,Gonzalez, Osleiner, Akbas, B., “Seismic Performance Evaluation of Steel Moment and Concentrically Braced Frames through Incremental Dynamic Analysis (Çelik
    Moment ve Merkezi Çaprazlı Çerçeve Sistemlerin Deprem Davranışının Artımsal
    Dinamik Analiz Yöntemi ile Değerlendirilmesi),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  13. Kaya, E.S.,Cakir, E., Aksar, B., Shen, J., Seker, O., Akbas, B., “Numerical Modeling
    Techniques for Braces in Steel Concentrically Braced Frames (Merkezi Çaprazlı
    Çerçevelerde Çapraz Elemanlarda Sayısal Modelleme Teknikleri),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  14. Aksar, B., Dogru, S., Akbas, B., Shen, J., Doran, B., “Amplified Seismic Loads for Collapse
    Prevention Performance Level in Steel Moment Frames (Çelik Moment Çerçevelerde
    Göçme Öncesi Performans Hedefi İçin Arttırılmış Deprem Etkileri),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  15. Ok, S., Akbas, B., “Cost Comparison of Steel and Reinforced Concrete Industrial Structures (Çelik ve Betonarme Endüstri Yapılarının Maliyet Açısından Karşılaştırılması),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  16. Dogru, S., Aksar, B., Akbas, B., Shen, J., “Seismic Energy Demands for Performance-Based Design of Steel Moment Frames (Çelik Çerçeve Sistemlerinin Performansa Dayalı
    Tasarımında Sismik Enerji İstemleri),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  17. Yalcin, O.,Uckan, E., Akbas, B., “Seismic Performance Evaluation of Liquid Storage Tanks
    with Triple Pendulum Systems (Üçlü Sarkaç İzolatörle Yalıtılmış Sıvı Depolama
    Tanklarının Deprem Davranışlarının İncelenmesi),”Gebze Technical University, Graduate School of Natural and Applied Sciences, Graduate Studies Symposium Presentation Days (Gebze Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Lisansüstü Araştırmalar Sempozyumu Tanıtım Günleri), 17-18 May 2016.

  18. Uckan, E., Kaya, E. S., O’Rourke, M., Cakir, F., Akbas, B., Cheng, Y., “The Performance of
    Thames Water Pipeline at the Kullar Fault Crossing,” 7th China-Japan-US Trilateral Symposium on Lifeline Earthquake Engineering, 1-4 June, Shanghai, China, 2016.

  19. Uckan, E., Kaya, E. S., Akbas, B., Cakir, F., Karamanos, S. A., “Three Dimensional Finite
    Element Model Simulation of a Steel Pipeline at a Strike Slip Fault Crossing,”
    ICONIC2016, 1st International Conference on Natural Hazards and Infrastructure, Chania, Greece, 28-30 June, 2016.

  20. Umut, O., Uckan, E., Akbas, B., Hatayama, K., Askan, A., Sisman, N., Karamanos, S.A., “Seismic Response of Base Isolated Liquid Containing Tanks to Real and Simulated Ground
    Motions,” ICONIC2016, 1st International Conference on Natural Hazards and Infrastructure, Chania, Greece, 28-30 June, 2016.

  21. Uckan, E.,Akbas, B., Kaya, E.S., Cakir, F., Ipek, C., Makaraci, M., Ataoglu, S., “Design Issues of Buried Pipelines at Permanent Ground Deformation Zones,” Natural Disasters and Disasters Management Symposium (DAAYS’16), Karabuk, Turkey, March 2-4, 2016.

  22. Aksar, B., Dogru, S., Shen, J., Cakir, F.,Akbas, B., “Earthquake Induced Amplified Loads in Steel Inverted V-Type Concentrically Braced Frames,3rd Turkish Conference on Earthquake Engineering and Seismology, Dokuz Eylul University,Izmir, October 14-16, 2015.

  23. Uckan, E., Umut, O., Uncu, G., Hatayama, K., Cakir,F.,Akbas, B.,Shen, J., "Seismic Response of;Base Isolated Liquid Storage Tanks to Near Fault Pulse Type Ground Motions,” 3rdTurkish Conference on Earthquake Engineering and Seismology, Dokuz Eylul University, Izmir, October 14-16, 2015.

  24. Cakir, F., Uckan, E., Gunaydın H.M., Kaya, E.S.,Shen, J.,Akbas, B., “Seismic Performance Evaluation of Historical Masonry Aqueducts,” 3rd Turkish Conference on Earthquake Engineering and Seismology, Dokuz Eylul University, Izmir, October 14-16, 2015.

  25. Akbas, B., Doran,B., Siyahi, B., “Bağımsız Proje Denetiminin Esasları ve Hesap Raporu Hazırlanması,” 3nci Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, Dokuz Eylül
    Üniversitesi, İzmir, 14-16 Ekim, 2015.

  26. Seckin, A., Atalay, H.M., Erdogan, H., Doran, B.,Akbas, B., “Mevcut Endüstri Yapısının Birim Şekil Değiştirme Esaslı Performans Değerlendirmesi,” 3nci Türkiye Deprem Mühendisliği ve Sismoloji Konferansı, Dokuz Eylül Üniversitesi, İzmir, 14-16 Ekim, 2015.

  27. Dogru, S., Aksar, B., Akbas, B., Shen, J., Doran, B., “Seismic Energy Response of
    Two-Story X-Braced Frames,” 3rd Turkish Conference on Earthquake Engineering
    and Seismology, Dokuz Eylul University, Izmir, October 14-16, 2015.

  28. Aksar, B., Dogru, S., Cakir, F., Shen, J.,Akbas, B., “Merkezi Çaprazlı Çerçevelerde Dayanım Farklılığı Sonucu Oluşan Burulma Etkileri,” 6ncı Çelik Yapılar Sempozyumu, Eskişehir, 15-17 Ekim 2015.

  29. Dogru, S., Aksar, B.,Akbas, B., Shen, J., Doran, B., “Çelik Çaprazlı Çerçevelerde
    Farklı Performans Seviyeleri İçin Sismik Enerji İstemleri,” 6ncı Çelik Yapılar
    Sempozyumu, Eskişehir, 15-17 Ekim 2015.

  30. Aksar, B., Dogru, S.,Akbas, B., Shen, J., Doran, B., “Merkezi Çaprazlı Çerçevelerde
    Arttırılmış Deprem Etkileri,” 6ncı Çelik Yapılar Sempozyumu, Eskişehir, 15-17;Ekim 2015.

  31. Cakir, F., Kaya, E.S., Aksar, B., Shen, J., Seker, O.,Akbas, B., “Merkezi Çaprazlı Çerçevelerde Çapraz Elemanlarda Sayısal Modelleme Teknikleri,” 6ncı Çelik Yapılar Sempozyumu, Eskişehir, 15-17 Ekim 2015.

  32. Cakir, F., Uckan, E., Seker, B.S.,Akbas, B., “2011 Van Depreminin Tarihi Yapılar Üzerindeki Etkileri ve Tarihi Yapıların Sismik Değerlendirmesi,” 5nci Tarihi Eserlerin Güçlendirilmesi ve Geleceğe Güvenle Devredilmesi Sempozyumu, Erzurum, 1-2 Ekim 2015.

  33. Aktan, S., Doran, B., Koksal, H. O., Yuzer, N., Ulukaya, S., Oktay, D.,Akbas, B., “Constitutive Modeling of Unreinforced Masonry Walls,” International Conference on Advances in Applied and Computational Mechanics (ACM), Izmir, August 5-7, 2015.

  34. Senol, E., Kose, I., Doran, B., Mezrea, P.E.,Akbas, B.,“Ductility Enhancement in Reinforced Concrete Structures with Buckling-Restrained Braced Frames,” ACE 2015, 2nd International Symposium on Advances in Civil and Infrastructure Engineering, Vietri sul Mare, Italy, 12-13 June 2015.

  35. Aksar, B., Dogru, S.,Akbas, B., Shen, J., Seker, O., Wen, R., “Seismic Energy Demands in Steel Moment Frames,” ACE 2015, 2nd International Symposium on Advances in Civil and Infrastructure Engineering, Vietri sul Mare, Italy, 12-13 June 2015.

  36. Aksar, B., Dogru, S.,Akbas, B., Shen, J., Seker, O., Wen, R., “Amplified Seismic Loads in Steel Moment Frames,” ACE 2015, 2nd International Symposium on Advances in Civil and Infrastructure Engineering, Vietri sul Mare, Italy, 12-13 June 2015.

  37. Aksar, B., Dogru, S., Akbas, B., Shen, J., Doran, B., “Amplified Seismic Load Effects for Collapse Prevention Performance Level in Steel Moment Frames,” Eight National Conference on Earthquake Engineering, 11 May-14 May 2015, Istanbul, Turkey.

  38. Dogru, S., Aksar, B., Akbas, B., Shen, J., Doran, B., “Multi-Level Seismic Energy Demands in Steel Moment Frames,” Eight National Conference on Earthquake Engineering, 11 May-14 May 2015, Istanbul, Turkey.

  39. Uckan, E.,Akbas, B., Cakir, F., Shen, J., O’Rourke, M., Caglar, M., and Paolacci,F., “Performance Evaluation of Buried Steel Pipes subject to Strike Slip Fault Offsets,COMPDYN 2015, 5th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Crete Island, Greece, 25–27 May 2015.

  40. Akbas, B., O’Rourke, M., Uckan, E., Shen, J., Caglar, M., “Performance-Based Design of
    Buried Steel Pipes at Fault Crossings,” Proceedings of the ASME 2015 Pressure and Vessels Piping Conference, PVP2015, July 19-23, Boston,Massachusetts, USA, 2015.

  41. Uckan, E., Akbas, B., Paolacci, F., Shen, J., Abali, E., “Earthquake Protection of Liquid Storage Tanks by Sliding Isolation Bearings,” Proceedings of the ASME 2015 Pressure and Vessels Piping Conference, PVP2015, July 19-23, Boston, Massachusetts, USA, 2015.

  42. Aksar, B., Dogru, S., Akbas, B., Shen, J.,Seker, O., Wen, R., “Amplified Seismic Loads in Steel Moment Frames,” Nordic Steel Conference 2015, Tampere, Finland, 23-25 September 2015.

  43. Akbas, B. and Cakir, F., “Performance-Based Evaluation of Historical Structures,” Workshop on Seismicity of Historical Structures, Istanbul Technical University, 3-5 November 2014.

  44. Bicer,N. And Akbas, B., “Orta Ölçekli İnşaat Firmalarında Proje Yönetim Metodolojisi ile Kurumsallaşma Uygulaması,” 3ncü Proje ve Yapım Yönetimi Kongresi, Antalya, 6-8 Kasım 2014.

  45. Doran, B., Koksal, HO, and Akbas, B., "Strengthening R/C and Masonry Structures with Fiber Reinforced Polymers in Disaster Areas," NATO Advanced Research Workshop "Engaging the Public to Fight the Consequences of Terrorism and Disasters," Tbilisi, Georgia, 02 June - 04 June 2014.

  46. Uckan, E. and Akbas, B., "The Raise of Earthquake Awareness in Turkey after the Last Decade," NATO Advanced Research Workshop "Engaging the Public to Fight the Consequences of Terrorism and Disasters," Tbilisi, Georgia, 02 June - 04 June 2014.

  47. Akbas, B.,Shen, J., Uckan, E., “Fast Construction of Blast/Seismic Resistant Prefabricated Residential Buildings,” NATO Advanced Research Workshop “Engaging the Public to Fight the Consequences of Terrorism and Disasters”,Tbilisi,Georgia, 02 June – 04 June 2014.

  48. Uckan, E., Akbas, B., Shen, J., Wen, R., Seker, O., Paolacci, F., Kaya, E., “Soil Effect on Response of Buried Steel Pipes at Strike-Slip Fault Crossings,” Second European Conference on Earthquake Engineering and Seismology, Special Session: Seismic Assessment of Lifelines, Istanbul, August 25-29, 2014.

  49. Paolacci, F., Giannini, R., Uckan, E., Akbas, B., Corritore, D., “Seismic Response Mitigation of Elevated Tanks by HDRB and FPS Isolation Systems,” Second European Conference on Earthquake Engineering and Seismology, Istanbul, August 25-29, 2014.

  50. Wen,R., Akbaş, B., Doran, B., Uckan, E.,Seker, O., Seker, P., and Shen, J., “Comparative Seismic Designs of SCBF using AISC 341-05 and AISC 341-10,” Tenth U.S. National Conference on Earthquake; Engineering, Frontier of Eartquake Engineering, paper# 1485, Anchorage, Alaska, July 21-25, 2014.

  51. Yarar, H., Aksar, B., Akbas, B, "Amplified Load Effects in Steel Moment Resisting Frames, 5th NAtional Conference on Steel Structures, Istanbul, 13-15 November, 2013.

  52. Doran, B.,Akbas, B, Senol, E., Seker, O., "Nonlinear Static Analysis of Strengthened Existing R/C Frame Building Using Steel Braces," Vienna Congress on Recent Advances in Earthquake Engineering and Structural Dynamics, VEESD 2013, Paper No: 479, Vienna, Austria, 28-30 August, 2013.
  53. Siyahi,B., Cetin, K.O., Unutmaz, B., Uckan, E., Karabulut, H., Akbas, B., Fahjan, Y., Altunel, E., “The Effects of Site and Soil Conditions to the Earthquake Damage: Oct, 23 2011 Van-Tabanlı Eartqhuake (Mw=7.2),” 15th World Conference on Eartqhuake Engineering, Lisbon, Portugal, Paper no: 3504, 2012.
  54. Akbas, B., Seker, O., Shen, J., Sutchiewcharn, N., Wen, R., Sabol, T., Span Length Effect
    in Seismic Demand on Column Splices in Steel Moment Resisting Frames,” 15th
    World Conference on Eartqhuake Engineering, Lisbon, Portugal, Paper no: 894,
    2012.
  55. Comlek,R., Akbas, B., Shen, J., Sutchiewcharn, N., Wen, R., Umut, O., “Inelastic Torsional Response of Steel Concentrically Braced Frames,” 15th World Conference on Eartqhuake Engineering,Lisbon, Portugal, Paper no: 3917, 2012.
  56. Fahjan,Y., Doran, B., Akbas, B., Kubin, J.,“Pushover Analysis for Performance Based-Seismic Design of RC Frames with Shear Walls,” 15th World Conference on Eartqhuake Engineering, Lisbon, Portugal, Paper no: 4059, 2012.
  57. Akbas, B.,Seker, O., Shen, J., Sutchiewcharn, N., Ozturk, A.Z., “Inelastic Displacementsin Steel Moment Resisting Frames under sever Earthquake Ground Motions,” Nordic Steel Conference, Oslo, Norway, 5-7 September 2012.
  58. Siyahi, B., Akbas, B., Fahjan, Y., Doran, B., Unutmaz, B., “Performance Based Design of a Pile-Wharf Structure Subjected to Earthquake Excitation in Turkey,” Second International Conference on Performance-Based Design in Earthquake Geotechnical Engineering, Taormina, Italy, May 28-30, 2012.
  59. Aydinoglu,M.N., Siyahi, B., Fahjan, Y., Akbas, B., “Soil-Pile-Structure Interaction: A Practical Approach for Performance-Based Seismic Design of Tall Buildings,” Second International Conference on Performance-Based Design in Earthquake Geotechnical Engineering, Taormina, Italy, May 28-30, 2012.
  60. Siyahi,B., Akbaş, B., Fahjan, Y., Doran,B., Unutmaz, B., “Performance Based Design of a Pile-Wharf Structure Subjected to Earthquake Excitation in Turkey,” Second International Conference on Performance-Based Design in Earthquake Geotechnical Engineering, Taormina, Italy, May 28-30, 2012.

  61. Umut,Ö., Akbas, B., Shen, J. “Design Issues of Wind Turbine Towers,” Proc. Of the 8th International Conference on Structural Dynamics (EURODYN 2011), Keuven, Belgium, 4-6 July 2011 .
  62. Akbaş, B., Soylu, A., Korkmaz, B., “Zayıflatılmış Kiriş Enkesitli Çelik Çerçevelerin Sismik Performansları (Seismic Performance of Steel Frames with Reduced Beam Sections),” 4th National Conference on Steel Structures (4. Ulusal Çelik Yapılar Sempozyumu), Istanbul, 24-26 Ekim, 2011.
  63. Akbaş, B., Dizdar, O., Korkmaz, B., “Merkezi Çaprazlı Çelik Çerçevelerde Çaprazlardaki Burkulmanın Yapının Sismik Davranışına Etkisi (Effect of Buckling on Seismic Response of Concentrically Braced Frames),” 4th National Conference on Steel Structures (4. Ulusal Çelik Yapılar Sempozyumu), Istanbul, 24-26 Ekim, 2011.
  64. Akbaş, B., “Endüstriyel Çelik Yapıların Sismik Detaylandırılması (Seismic Detailing of Industrial Steel Structures),” 1st Turkish Earthquake Engineering and Seismology Conference (1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı), Ankara, 11-14 October, 2011.
  65. Akbaş, B., Fahjan, Y., Shen, J., Siyahi, B., Umut, O., Korkmaz, B., “Design Considerations and Seismic Performance of Wind Turbine Towers Considering Soil-Structure Interaction (Rüzgar Türbinlerinde Zemin-Yapı Etkileşimi Gözönüne Alınarak Deprem Performansının Belirlenmesi ve Tasarımda Dikkat Edilmesi Gerekenler),” 1st Turkish Earthquake Engineering and Seismology Conference (1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı), Ankara, 11-14 October, 2011.
  66. Doran, B. Akbaş, B., Sayim, İ., Fahjan, Y., Alacalı, S.N., “Uzun Periyotlu Bir Yapıda Yapısal Sağlık İzlemesi ve Deprem Performansının Belirlenmesi (Structural Health Monitoring and Seismic Performance of a Long-Period Structure),” 1st Turkish Earthquake Engineering and Seismology Conference (1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı), Ankara, 11-14 October, 2011.
  67. Unutmaz, B., B. Siyahi, B., Fahjan, Y.,Akbaş, B., “Derin Alüvyon Dolgunun Doğrusal Olmayan Davranışının Eşdeğer Lineer and Doğrusal Olmayan Yöntemlerle Karşılaştırılması (Comparison of Nonlinear Behavior of Deep Alluvial Fillings with Equivalent Lineer and Nonlinear Methods),” 1st Turkish Earthquake Engineering and Seismology Conference (1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı), Ankara, 11-14 October, 2011.
  68. Fahjan, Y.,Akbaş, B., Siyahi, B., “Yüksek Binalar İçin Deprem Tehlike Değerlendirmesi ve Zemin Bağımlı Tasarım Yer Hareketlerinin Belirlenmesi (Determinin Seismic Hazard and Site-Dependent Earthquake Ground Motions for Tall Buildings,” 1st Turkish Earthquake Engineering and Seismology Conference (1. Türkiye Deprem Mühendisliği ve Sismoloji Konferansı), Ankara, 11-14 October, 2011.
  69. Çetindemir, O.,Akbaş, B., Fahjan, Y., Shen, J., “Nonlinear Dynamic Analysis of Long-Span Cable-Stayed Bridges and Modeling Issues,” 2nd Symposium on Bridges and Viaducts (2. Köprüler ve Viyadükler Sempozyumu), Eskişehir, 28-30 September, 2011.
  70. Siyahi, B.,Akbaş B., Fahjan, Y., “Türkiye’de Deprem Mühendisliği Alanında Beklentiler ve İhtiyaçlar Doğrultusunda Sorunlara Çözüm Arayışları: 5N1K Yaklaşımı (The Search for a Solution Against Expectations and Needs in Earthquake Engineering in Turkey: 5W1H Approach), Seventh National Conference on Earthquake Engineering, Istanbul, May 31 - June 3, 2011.
  71. Akbaş, B., Shen, J., Şeker, O. And Toru, P., “Evaluation of Story Drifts in Steel Moment Resisting Frames,” Seventh National Conference on Earthquake Engineering, Istanbul, May 31- June 3, 2011 .
  72. Fahjan, Y, Aydin,M., veAkbaş, B., “Ortogonal Olmayan Betonarme Binaların Deprem Performanslarının Değerlendirilmesi,” Seventh National Conference on Earthquake Engineering, Istanbul, May 31- June 3, 2011.
  73. Siyahi,B., Budiman, J.,Akbaş, B., and Shen, J., “Design of Shallow Foundations based on LRFD Design Method,” Seventh National Conference on Earthquake Engineering, Istanbul, May 31- June 3, 2011.
  74. Siyahi, B., Fahjan, Y., Doran, B.,Akbaş, B., Özkan, T., “Kazıklı İskelelerin Deprem Performanslarının Değerlendirilmesi (Seismic Performance Evaluation of Pile-Wharf Structures),” Seventh National Conference on Earthquake Engineering, Istanbul, May 31- June 3, 2011 .
  75. Akbas, B.,Gokmenoglu, G., Gurbuz, S., and Siyahi, B., “Soil Effect on Hysteretic Energy to Energy Input Ratio in Nonlinear SDOF and MDOF Systems,” 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, August 30-September 3, 2010.
  76. Akbas, B., Sayim, I., Doran, B., “Structural Modeling and Use of Real-Time Kinematic GPS for Monitoring of a Long-Period Building,” 14th European Conference on Earthquake Engineering, Ohrid, Macedonia, August 30-September 3, 2010.
  77. Siyahi,B., Akbas, B. and Onder, N.D., “Evaluation of Liquefaction-Induced Lateral Spreading by a Neural Network (NN) Model,” 14 World Conference on Earthquake Engineering, Beijing, China, Paper no: 04-02-0080, October 12-17, 2008.
  78. Shen, J.,Sabol, T., Akbas, B., SutchIewcharn, N. and CaI, W., “Seismic Demand on Column SplIces In Steel Moment Frames,” 14 World Conference on Earthquake Engineering, Beijing, China, Paper no: 05-05-0028, October 12-17, 2008.
  79. Akin, D. and Akbas, B., “A Neural Network (NN) Model to PredIct IntersectIon Crashes Based Upon Crash PropertIes: DrIver, Vehicle, and Roadway Surface Characteristics,” Proc.10th International Conference on the Applications of Advanced Technologies In Transportation (AATT 2008), School of Civil Engineering, National Technical University of Athens, Athens, Greece, Paper No.651, May 27-31, 2008.
  80. Siyahi, B., Sunbul, A.B. Fahjan, Y., Aslan, H.,Akbas, B.ve Shen, J., “Taş Kolonlarla GuçlendIrIlmIş TemellerIn DInamIk DavranIşI: BIr Vaka AnalIzI (DynamIc Response of Stone-Column ReInforced FoundatIons: A Case Study,” ZemIn MekanIğI ve Temel MuhendIslIğI OnIkIncI Ulusal KongresI (12th National Conference on Soil Mechanics and Foundation Engineering), Selçuk UnIversItesI, Konya, 16-17 EkIm 2008.
  81. Yuzer, N.,Akbas, B., and Kizilkanat, A., “Predicting the Compressive Strength of Concrete Exposed to High Temperature with a Neural Network Model,” Turkish Cement Manufacturers’ Association, 3rd International Symposium , Sustainability In Cement and Concrete, Vol.1, pp. 455-464, Istanbul, 21-23 May 2007).
  82. Yuzer, N.,Akbas, B.,Kizilkanat, A.,“Yuksek Sıcaklık Etkisinde Kalan Betonun Basınç Dayanımı Renk Değişimi İlişkisinin Yapay Sinir Ağları Yöntemi İle Tahmini,” 7. Ulusal Beton KongresI, TMMOB Inşaat Muhendisleri Odası, Istanbul ŞubesI, Istanbul, 28-30 KasIm 2007 .
  83. Tugsal,U.M., Kara, F.I.,Akbas, B., and Fahjan, Y., “FarklI ZemIn GruplarIndakI EenerjI DağIlImlarInI Incelemek IçIn BIr Neural Network YaklaşImI (A Neural Network Approach To InvestIgate the Energy DIstrIbutIons on DIfferent SoIl Groups), ” SIxth NatIonal Conference on Earthquake Engineering (6UDMK), Istanbul TechnIcal UnIversIty, Istanbul, October 16-20, 2007.
  84. Sutchiewcharn,N., Shen, J., and Akbas, B., “Seismic Design Issues of the Panel Zone In Special Moment Frames wIth Deep-Column Sections,” 8th U.S. National Conference on Earthquake Engineering, San Francisco, California, USA, Paper No. 1391, April 18-22, 2006.
  85. Alacalı, S.N., Akbas, B., and Doran, B., “Predicting Lateral Confinement Coefficient for R/C Rectangular Columns by a Neural Network Model,” First European Conference on Earthquake Engineering and Seismology, Paper No. 1159, Geneva, Switzerland, September 3-8, 2006.
  86. Akin, D. and Akbas, B., “A Neural Network Approach to ClassIfy Motor VehIcle Crashes at Intersections,” Third Traffic and Road Safety International Congress and Exhibition, Ankara, Turkey, 17-19 May 2006.
  87. Akbas, B.TemIz,H., Tugsal, U.M., Gokce, F.I.,Alçak,Orta ve Yuksek KatlI ÇelIk Çerçevelerde HIsteretIk EnerjI TaleplerI,” KocaelI 2005 Deprem Sempozyumu, KocaelI UnIversItesIy, Kocaeli, Mart 23-25, 2005.
  88. Akbas, B. and CetIner,A.N., “Tek SerbestlIk DerecelI Sistemlerde Enerji Parametreleri,” KocaelI 2005 Deprem Sempozyumu, KocaelI UnIversItesIy, Kocaeli,Mart 23-25, 2005.
  89. Akbas,B. and Shen, J., “Energy Approach In Performance-Based Earthquake ResIstant DesIgn (PB-EQRD),” 12th European Conference on Earthquake Engineering, Paper No: 043, London, UK, September 2002.
  90. Akbas, B., Uckan, E., and Shen, J., “Seismic BehavIor and Push-Over AnalysIs of M. Inan VIaduct,” 12th European Conference on Earthquake Engineering, Paper No: 042, London, UK, September 2002.
  91. Akbas,B., Shen, J., and DIncer, T., “Effect of OrIented Strand Board Panels on the Lateral StIffness of LIghtweIght Frames,” InternatIonal IASS SymposIum on LIghtweIght Structures In CIvIl Engineering, Warsaw, Poland, 24-28 June, 2002.
  92. Akbas, B.Shen, J., Kara, F.I., and Tuğsal, U.M., “Seismic BehavIor of Steel Frames and Push-Over Analyses,” 5. Ulusal Deprem MuhendIslIğI KonferansI, BIldIrI No: AT-053, Istanbul, MayIs 26-30, 2003.
  93. Korkmaz, A., Sari, A.,Akbas, B., “An EvaluatIon of Pushover AnalysIs For Various Load DIstrIbutIons,” 5. Ulusal Deprem MuhendIslIğI KonferansI, BIldIrI No: AT-053, Istanbul,MayIs 26-30, 2003.
  94. Akbas, B., Tuğsal, U.M., Kara, F.I., and Gunay, M.K., “Tek ve Çok Serbestlik DerecelI SIstemlerIn Deprem DavranIşlarInIn KarşIlaştIrIlmasI,” KocaelI 2003 Deprem Sempozyumu, KocaelI UnIversItesI, KocaelI,Mart 12-14, 2003.
  95. Uckan, E.,Akbas, B., Erdik, M. and Gurbuz, C., "Forced Vibration Tests of a Three Story Steel Structure," Earhtquake Prognostics Worldforum, Seismic Safety of Big Cities, Turkish Earthquake Foundation, September 21-25, Istanbul, 1998.
  96. Akbas, B. and Shen, J., “Energy-Based DesIgn Methodology for Steel Moment ResIstIng Frames,” European Conference on Earthquake Engineering, ParIs, France, 1998.
  97. Akbas, B. and Shen, J., “Energy-based Earthquake ResIstant DesIgn In Steel Moment ResIstIng Frames,” Second InternatIonal Conference on BehavIor of Steel Structures In Seismic Areas, STESSA 97, Kyoto, Japan, 3-8 August, 1997.
  98. Akbas, B. and Shen, J., “Energy-based Earthquake ResIstant DesIgn,” The Fourth InternatIonal Kerensky Conference,“Structures In the New MIllennIum,” Hong Kong, September 3-5, 1997.
  99. Akbas,B."Enerjye Dayali Depreme DayanIklI YapI TasarImI,” 4. Ulusal Deprem MuhendIslIğI KonferansI, Ankara, 17-19 September 1997.
  100. Akbas,B., Theerevat, K., and Shen, J., “Energy Aspects of ComposIte/HybrId Frames,” Eleventh World Conference on Earthquake Engineering, Paper no. 211, Acapulco, MexIco, June 23-28, 1996.
  101. Theerevat, K., Shen, J., and Akbas, B., “Seismic Study of HybrId Frames,” Eleventh World Conference on Eartqhauke Engineering, Paper no. 212, Acapulco, MexIco, June 23-28, 1996.
  102. Akbas, B. and Shen, J., “Seismic DesIgn Study of P-Delta Effect on Steel Frames wIth VarIous ConnectIons,” Seventh CanadIan Conference on Earthquake Engineering, pp. 525-532, Montreal, Canada, 1995.
  103. Shen, J.-H. and Akbas, B., “NonlInear DynamIc Response of SemI-RIgId Steel BuIldIng Frames,” InternatIonal Conference on ComputatIonal Methods In Structural and Geotechnocal Engineering, p.p. 1169-1174, Hong-Kong, December 12-14, 1994.

Books and Chapters

  1. Engaging the Public to Fight the Consequences of Terrorism and Disasters, editors
    Apostol, I., Mamaasakhlisi, J., Subotta, D., Reimer, D.W.G., ISBN Print:
    978-1-61499-492-3 (ISBN Online: 978-1-61499-493-0), IOS Press, STM Publishing
    House, Netherlands, 2015.
  2. Shen, J., Hao, H., and Akbas, B., “Hysteresis Energy in Moment Frames, Engineering Science of Structures,” A Special Publication Honoring S.A.Guralnick, Illinois Institute of Technology, pp. 112-138, 1999

Projects and Reports

  1. Akbaş, B. ve Akşar, B., “Süneklik Düzeyi Yüksek ve Normal Merkezi Çaprazlı Çelik Çerçevelerde Doğrusal Olmayan Burulma Davranışı,” Proje No: 2014-A-29, Bilimsel Araştırma Projesi, Gebze Teknik Üniversitesi, Temmuz 2014 – Temmuz 2015.

  2. Akbaş, B., “Çelik Moment Ve Merkezi Çaprazli Çerçevelerde Arttirilmiş Deprem Etkileri Ve Sismik Enerji Talepleri,”TÜBİTAK-MAG, 2014-2016.

  3. Shen, J., Carter, C., Akbas, B., Sutchiewcharn, N., and Wen, R. “Seismic Evaluation of Braced Frames with and without Design Ductility,” Technical Report,American Institute of Steel Construction, March 2012.

  4. Shen, J, Sutchiewcharn, N., Cai, W, and Akbas, B., “Seismic Demands on Column Splices In Special Moment Frames,” Technical Report, Structural Engineering, Illinois Institute of Technology, 2007.
  5. Akbas, B, Sayim, I., Doran, B., Alacali, S.M., and Hancioglu, B., “Dynamic Monitoring of Long-Period Structures Using Real-time Kinematic DGPS,” TUBITAK (The Scientific and Technological Research Council of Turkey) Project,2006-2009.
  6. Yüzer, N., Aköz, F., Öztürk, L.D., Akbas, B., Kızılkanat, A.B., Kabay, N.,Çakır, Ö., "Yangına Maruz Kalan Yapılarda Beton Basınç Dayanımı-Renk Değişimi İlişkisinin Araştırılması,” TÜBİTAK Proje No: İÇTAG-I682 (103I040), Nisan 2004-Nisan 2007
  7. Akbas, B, and Shen, J., “Seismic Behavior and Design Principles of Gusset Plates in Steel Braced Frames,” Project No. 02-B-02-01-06, Scientific Research Projects, Gebze Institute of Technology, November 2004.
  8. Akbas, B, Nadar, M., and Temiz, H., “Failure Probability of Multi-Degree-of-Freedom Systems with Multi-Varied Normal Assumption,” Project No. 02-B-02-01-05, Scientific Research Projects, Gebze Institute of Technology, November 2004.
  9. Akbas, B, Kara, F.İ., and Tuğsal, Ü.M., “Comparison of Push-Over Analyses and Non-Linear Dynamic Time History Analyses in Low-, Medium-, and High,Rise Steel Frames,” Project No. 02-A-02-01-03, Scientific Research Projects, Gebze Institute of Technology, June 2003.
  10. Akbas, B. and Shen, J., “Effect of Interior Semi-Rigid Frames on the Seismic Behavior of Steel Moment Resisting Frames,” Report No: GYTE-EQ-S-03-001, Department of Earthquake and Structural Science, Gebze Institute of Technology, January 2003.
  11. Akbas, B, Shen, J., and Çetiner, A.N., “Energy Approach in Performance-Based Earthquake Resistant Design,” Project No. 01-B-02-01-15, Gebze Institute of Technology Research Fund, November 2002.
  12. Akbas, B. and Uckan, E., “ Adana Earthquake (June 27th) 1998 - Reconaissance Report: July 1998, Gebze Institute of Technology, Turkey, 1998.
  13. Uckan, E., Akbas, B., Gul, M., Mert, A.. “Development of Strong Motion Data Collection and Evaluation System,” Project No. 64-B-02-01-01, Gebze Institute of Technology Research Fund, October 27, 1998.
  14. Akbas, B. and Shen, J., “Energy-based Earthquake Resistant Design,” Department of Civil and Architectural Engineering, Illinois Institute of Technology, Report No: IIT-CAE-96/005, September, 1996.
  1. Özge Yalçın, “Üçlü Sarkaç İzolatörle Yalıtılmış Sıvı Tanklarının Deprem Davranışlarının
    İncelenmesi,” 2016.

  2. Mursel İğin,“Farklı Çelik Yapı Taşıyıcı Sistem Konfigürasyonlarının Çelik Yapı
    Boyutlandırmasına Etkisi,” 2016.

  3. Faruk Koçak, “Süneklik Düzeyi Yüksek Betonarme Çerçevelerde Tasarım Depremi Altında Hedef Yer Değiştirmenin Belirlenmesi,” 2014.

  4. Serkan Gökalp, “Süneklik Düzeyi Yüksek Alçak ve Orta Katlı Betonarme Çerçevelerde Tasarım Depremi Altında Eşit Yer Değiştirme Kuralının İncelenmesi,” 2014.

  5. Hilal Yarar, Süneklik Düzeyi Yüksek Çelik Moment Çerçevelerde Arttırılmış Deprem Etkisinin Statik ve Dinamik Analizlerle İncelenmesi (Evaluation of Amplified Seismic Loads in Special Moment Frames through Static and Dynamic Analyses, 2013.

  6. Yılmaz Bulut, Merkezi Çaprazlı Çelik Çerçevelerde Çapraz Düzeninin Çelik Çerçevelerin Dinamik Davranışına Etkisi (Effect of Braced Configuration on Seismic Performance of Braced Frames, 2013.
  7. Ünal Ekşi, Süneklik Düzeyi Yüksek Dışmerkez Çaprazlı Çelik Çerçeve Elemanlarının Tasarımı İçin Hesap Çizelgesi Programı Hazırlanması ve Tasarım Uygulamaları (A Spreadsheet for the Design of Eccentrically Braced Frames), 2013.
  8. Emel Altıntaş, Çelik Perdeli Binaların Deprem Performansları (Seismic Performance of Steel Plate Shear Walls), 2013.
  9. Ahmet Metin Yildirim, Çelik Taşıyıcı Sisteme Sahip Yüksek Binaların Tasarımı ve Analizi (Steel Tall Building Design and Analysis), 2013.
  10. Onur Şeker,Süneklik Düzeyi Yüksek Çelik Çerçevelerin Etkin Göreli Kat Ötelemelerinin İncelenmesi (Evaluation of Story Drifts in Steel Moment Resisting Frames), Eşdanışman, 2011 (YTÜ).
  11. Oğuzhan Çetindemir, Çelik Tabliyeli Eğik Kablo Askılı Köprülerin Deprem Performanslarının İncelenmesi (Seismic Performance Evaluation of Cable-Stayed Bridges with Steel Deck),2011.
  12. Hüseyin Fırat Yalçın, Eksenel Kuvvet Etkisindeki Çelik Kolon Ayaklarının Boyutlandırılması İçin Hesap Çizelgesi Programı Hazırlanması ve Tasarım Uygulamaları (Spreadsheet for the Design of Base Plates Under Axial Forces and Design Practices), 2010.
  13. Rıza Yeşil, Süneklik Düzeyi Çelik Moment Çerçeve Elemanlarının Tasarımı İçin Hesap Çizelgesi Programı Hazırlanması ve Tasarım Uygulamaları (A Spreadsheet for the Design of Special Moment Resisting Frame Elements and Design Practices), 2010.
  14. Yusuf Serdar İşci, Süneklik Düzeyi Yüksek Merkezi Çaprazlı Çelik Çerçeve Elemanlarının Tasarımı İçin Hesap Çizelgesi Programı Hazırlanması ve Tasarım Uygulamaları (A Spreadsheet for the Design of Special Concentrically Braced Steel Frame Elements and Design Practices), 2010.
  15. Abdullah Soylu, Zayıflatılmış Kiriş Enkesitli Çelik Çerçevelerin Sismik Performanslari (Seismic Performance of Steel Frames with Reduced Beam (RBS) Sections), 2010.
  16. Selman Akdoğan, Çelik Moment Birleşimlerinin Kümülatif Plastik Dönme Kapasitelerinin Yapay Sinir Ağları Yardımıyla Tahmin Edilmesi (Estimation of Cumulative Plastic RotationCapacity of Steel Moment Connection Using Artificial Neural Networks), 2010.
  17. Mehmet Toyanç Yazgan, angın Geçirmiş Çelik Binaların Dayanımlarının Araştırılması
    (Investigation of Lateral Strength of Steel Buildings Subject to Fire),
    2010.
  18. Osman Dizdar,Merkezi Çaprazlı Çelik Çerçevelerin Sismik Performansları (Seismic Performance of Concentrically Braced Frames),2009.
  19. V. Oner, Çelik Çerçevelerde Kolon Ek Yerlerindeki Sismik Talepler (Seismic Demands on Column Splices in Steel Moment Frames), 2006.
  20. S. Gurbuz, Çelik Çerçevelerde Kirişlerin On Tasarimi Için Bir Yaklaşim (A Preliminary Design Approach of Beams in Steel Frames), 2006.
  21. O.Kiliç, Deprem Hareketlerine Maruz Doğrusal Olmayan Tek Serbestlik Dereceli Sistemlerin Goçme Olasiliklari (Failure Probability of Singel Degree of Freedom Systems Subjected to Earthquake Ground Motions), 2006.
  22. U.M.Tuğsal,Çelik Çerçevelerde Histeretik Enerji Talepleri ve Oteleme Analizleri (Hysteretic Energy Demands and Push-Over Analyses in Steel Frames), 2005.
  23. F.I.Kara, Çelik Çerçevelerde Oteleme Analizleri ve Plastik Mafsal Donmesi Değişimleri (Push-Over Analyses and Varions in Plastic Rotations in Steel Moment Frames), 2004.
  24. B.Şahinalp,ÇelIk Yapilarda P-Delta Etkisinin Araştirilmasi (Investigation of P-Delta Effects in Steel Frames), 2004.
  25. S.Bilgiç, Betonarme Yapilarda Sismik Iyileştirme Yontemleri ve Maliyet Karşilaştirmalari (Seismic Retrofitting Mithods and Cost Comparison in R/C Structures),2004.
  26. G.Gokmenoğlu,Tek Serbestlik Dereceli Sistemlerde Enerji Parametrelerinin ve Yapısal Mukabelenin Istatistiki Olarak Değerlendirilmesi (Probabilistic Assessment of Energy Parameters and Structural REsponse in Single Degree of Freedom Systems), 2004.
  27. A.N.ÇetIner, Tek Serbestlik DerecelI Sistemlerde Enerji Talebinin Olasiliksal Yontemle Bulunmasi (Probabilistic Assessment of Energy Demand in Single Degree of Freedom Systems), 2002.
  28. N. Şahin, Yapılarda Sismik İzolasyon için Sismik& İzolasyonun Kullanılması (Use of Seismic İsolation in Buildings), 2002 (Co-Advisor)(YTÜ).
  29. M.K.Gunay, Yer HareketIne Maruz Tek Serbestlik Dereceli Sistemlerde Enerji-Periyot-Suneklik Ilişkileri (Energy-Period Relationships in Single Degree of Freedom Systems Subject to Earthquake Ground Motions), 2003 (Co-Advisor) (YTÜ).
  • Doktora: Illinois Institute of Technology - Structural Engineering
  • Yüksek lisans: Yıldız Teknik Üniversitesi - İnşaat Mühendisliği / Yapı Anabilim Dalı
  • Lisans: Yıldız Teknik Üniversitesi - İnşaat Mühendisliği Bölümü